Hi Tim,

I have the same problem on NT servers - I started using the
dsmcad on NT - but because of the problems with the
managedservices I never rolled it out to other servers
Are you on 4.1.2?
You should go to 4.2.2 - that seems to be more stable as far
as the DSMCAD is concerned.

Regards
Christo
====================================================================


netware tsm client dsmcad is loaded but backup never runs
i have to unload and reload dsmcad to force the next backup
anybody ever see this problem

Next operation scheduled:
------------------------------------------------------------
Schedule Name:         NETWARE_MON
Action:                Incremental
Objects:
Options:
Server Window Start:   22:00:00 on 09/16/2002
------------------------------------------------------------
Waiting to be contacted by the server.

backup should of run at 22:00:00 on 09/16/2002

tsm server 5.1.1
netware client 5.1.0

netware cleint options

MANAGEDSERVICES WEBCLIENT SCHEDULE
SCHEDMODE          PROMPTED

Tim Brown
Systems Specialist
Central Hudson Gas & Electric
284 South Avenue
Poughkeepsie, NY 12601

Phone: 845-486-5643
Fax: 845-486-5921
Pager: 845-455-6985

tbrown AT cenhud DOT com
______________________________________________
"The information contained in this communication is confidential and
may be legally privileged.  It is intended solely for the use of the
individual or entity to whom it is addressed and others authorised to
receive it.  If you are not the intended recipient you are hereby
notified that any disclosure, copying, distribution or taking action
in reliance of the contents of this information is strictly prohibited
and may be unlawful.  Absa is liable neither for the proper, complete
transmission of the information contained in this communication, nor
for any delay in its receipt, nor for the assurance that it is
virus-free."