hi erik,
tried that firtshand, that's the tsm way....with adsm3.1 it apparently
doesnt work that way.
(leuk weer eens wat van je te horen erik! waarschijnlijk weet je niet meer
wie ik ben maar dat maakt niet uit;)
-----Original Message-----
From: Loon, E.J. van - SPLXM [mailto:Eric-van.Loon AT KLM DOT COM]
Sent: Wednesday, September 18, 2002 2:12 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: create additional diskpool in adsm3.1 on AIX problem
Hi Michelle!
Could it be that /bfaa1dk3 is a raw logical volume? If so, don't specify a
filename and specify /dev/rbfaa1dk3.
Just a thought...
Kindest regards,
Eric van Loon
KLM Royal Dutch Airlines
-----Original Message-----
From: Michelle Wiedeman [mailto:michelle.wiedeman AT MULTRIX DOT COM]
Sent: Wednesday, September 18, 2002 14:01
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: create additional diskpool in adsm3.1 on AIX problem
hi pétur!
thnx for your reply, the message im getting is ANR7864W Unable to write
volume /bfaa1dk3/bf
I created a logical volume and filespace named /bfaa1dk3 which resides on 1
harddisk of 10GB. there is aprox 8672MB freespace. Im using the GUI to
create additional volumes.
Do you have any clues?
mi©helle
-----Original Message-----
From: Pétur Eyþórsson [mailto:peddi AT ITN DOT IS]
Sent: Wednesday, September 18, 2002 1:06 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: create additional diskpool in adsm3.1 on AIX problem
Dear Michelle.
here are some tips for you
make sure you have enough space when you try to create the fylesystem.
df -sk
try not to have more than one disk volume per Paschal volume, due to
performance issues.
What commands are you running,
Is there enough space for the file, and most importantly what is the error
code you receive when you run this command?
Kvedja/Regards
Petur Eythorsson
Taeknimadur/Technician
IBM Certified Specialist - AIX
Tivoli Storage Manager Certified Professional
Microsoft Certified System Engineer
peddi AT itn DOT is
Nyherji Hf Simi TEL: +354-569-7700
Borgartun 37 105 Iceland
URL: http://www.nyherji.is
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU]On Behalf Of
Michelle Wiedeman
Sent: 18. september 2002 07:43
To: ADSM-L AT VM.MARIST DOT EDU
Subject: create additional diskpool in adsm3.1 on AIX problem
Importance: High
Hi all,
Until now i've worked with tsm only and in this when you create additional
diskvolumes you create a logical volume and point tsm to the /dev/rLV. It
then formats and uses the space assigned.
Now m,y problem is creating additional diskvolumes within adsm 3.1. I,ve
tried doing this the same way, but it gives error.
I.ve tried then to create a filespace for it, but it didnt quite grasp that
either. I cant really find any usefull documentation on this and its really
important that its done today....please help and receive my undieing
gratitude!! ;o)
mi©helle
**********************************************************************
For information, services and offers, please visit our web site:
http://www.klm.com. This e-mail and any attachment may contain confidential
and privileged material intended for the addressee only. If you are not the
addressee, you are notified that no part of the e-mail or any attachment may
be disclosed, copied or distributed, and that any other action related to
this e-mail or attachment is strictly prohibited, and may be unlawful. If
you have received this e-mail by error, please notify the sender immediately
by return e-mail, and delete this message. Koninklijke Luchtvaart
Maatschappij NV (KLM), its subsidiaries and/or its employees shall not be
liable for the incorrect or incomplete transmission of this e-mail or any
attachments, nor responsible for any delay in receipt.
**********************************************************************
|
