Re: Volume Status = Full but porcent utilization = 68.7
2002-09-13 10:14:28
The tape is full. It's just taking account of already expired data. Look at
"Pct. Reclaimable Space".
Paul van Dongen
-----Original Message-----
From: Camilo A. Marrugo [mailto:camilo AT DIALTONE DOT COM]
Sent: Friday, September 13, 2002 10:54
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Volume Status = Full but porcent utilization = 68.7
Just wondering is anyone out there experiences the same with the library
tapes. Here is how a "qu vol <vol#> f=d" looks:
tsm: TSM>qu vol A00003 f=d
Volume Name: A00003
Storage Pool Name: TAPEDATA
Device Class Name: LTOTAPE
Estimated Capacity (MB): 125,097.7
Pct Util: 68.7
Volume Status: Full
Access: Read/Write
Pct. Reclaimable Space: 32.3
Scratch Volume?: Yes
In Error State?: No
Number of Writable Sides: 1
Number of Times Mounted: 516
Write Pass Number: 1
Approx. Date Last Written: 08/19/02 11:56:27
Approx. Date Last Read: 09/11/02 00:15:48
Date Became Pending:
Number of Write Errors: 0
Number of Read Errors: 0
Volume Location:
Last Update by (administrator):
Last Update Date/Time: 08/16/02 06:49:19
Is there a way to make sure that the tapes get used 100% before setting
the Volume status to Full?
TIA
Camilo Marrugo
--
Camilo Marrugo
Backup Solutions Administrator/Sr. Systems Administrator
Dialtone Inc. an Interland Company
camilo AT dialtone DOT com - http://www.dialtone.com
Voice: (954) 581-0097 ext. 130 - Fax: (954) 581-7629
"We are Interland... One Team, One Vision."
|
|
|