Robin and Jim,
I've just read all the read me's for the supported (current and previous 2)
versions of the Novell client, and only the oldest (of the 3) supports 4.11. It
looks to me from the docs like the most recent versions of the client don't
support 4.11.
Douglas C. Nelson
Distributed Computing Consultant
Alltel Information Services
Chittenden Data Center
2 Burlington Square
Burlington, Vt. 05401
802-660-2336
-----Original Message-----
From: Jim Kirkman [mailto:jmk AT EMAIL.UNC DOT EDU]
Sent: Wednesday, August 21, 2002 10:10 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: Netware V6 Restore From Netware V4.11 Problem
Robin,
I think you will need to upgrade the client on the 4.11 box to the same level as
the 6.0, run a backup, then do your restore.
Jim
Halvorsen Geirr Gulbrand wrote:
> Hi Robin,
> I've seen something like this in Netware 5., after sp3.
> What happened was that some mystical netware flag on files and directories
> are changed in sp3, and the flag changes meaning to "Quota Full".
> That made it very difficult to restore files - we could restore a directory,
> but files came in as 0 bytes.
> The issue is described in an article at Novell's web-site:
> http://support.novell.com/cgi-bin/search/searchtid.cgi?/10063960.htm
> I'm not sure if this is the right answer, but it could be.
>
> Rgds.
> Geirr G. Halvorsen
>
> -----Original Message-----
> From: Robin Lowe [mailto:robin_lowe AT STANDARDLIFE DOT COM]
> Sent: 21. august 2002 14:55
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Netware V6 Restore From Netware V4.11 Problem
>
> Hi,
>
> I am having a problem restoring data to a new Netware V6 system with TSM
> 5.1.0.0 client
> Netware patch SP1 is applied.
> TSA600 is @ 6.00a 10 January 2002
> SMDR is @ 6.00a 12 January 2002
>
> Source client is a Netware V4.11 system with ADSM 3.1.0.8.
>
> Problem is that we are upgrading the Netware system to V6, and we want to
> restore the data backed up from the ADSM 3.1.0.8 client using the TSM
> 5.1.0.0 client
> On the source TSM (ADSM 3.1.0.8) client I have set access backup * slukmac1
> On the target TSM (TSM 5.1.0.0) client I issue the following restore
> command to restore the directory structure only :
>
> restore sluklrf4\data:/* slukmac1\mac1:/ -sub=y -dirsonly
> -fromnode=sluklrf4
>
> What then happens is the BASE directories only are restored, ie, no sub
> directories.
>
> Has anyone seen a similar problem and if so how do I fix it ?
>
> By the way, we have also tested a restore from a TSM 4.2.1.0 client from a
> netware 5 server, and we get the identical sympthoms.
>
> Thanks
>
> Robin Lowe
> Senior Storage Analyst
>
> For more information on Standard Life, visit our website
> http://www.standardlife.com/
>
> The Standard Life Assurance Company, Standard Life House, 30 Lothian Road,
> Edinburgh EH1 2DH, is registered in Scotland (No. SZ4) and regulated by the
> Financial Services Authority. Tel: 0131 225 2552 - calls may be recorded or
> monitored. This confidential e-mail is for the addressee only. If received
> in error, do not retain/copy/disclose it without our consent and please
> return it to us. We virus scan and monitor all e-mails but are not
> responsible for any damage caused by a virus or alteration by a third party
> after it is sent.
--
Jim Kirkman
AIS - Systems
UNC-Chapel Hill
966-5884
|
