Re: tsm database problem
2002-04-18 09:24:43
Hi
You don't have to use a manual library, a 3583 library will work.
Best Regards
Daniel Sparrman
-----------------------------------
Daniel Sparrman
Daniel Sparrman
Exist i Stockholm AB
Propellervägen 6B
183 62 HÄGERNÄS
Växel: 08 - 754 98 00
Mobil: 070 - 399 27 51
Burak Demircan <burak.demircan AT DAIMLERCHRYSLER DOT COM>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
2002-04-18 15:19
Please respond to "ADSM: Dist Stor Manager"
To: ADSM-L AT VM.MARIST DOT EDU
cc:
Subject: Re: tsm database problem
Hi,
The TSM documentation says that I can do unloaddb with only a manual
library.
How can i do it with
a 3583 LTO library? Is it possible to use my external 8mm tape drive?
Thank you very much to all
Regards,
Burak
mahesh AT COSMOS.DCMDS.CO DOT IN
Sent by: ADSM-L AT VM.MARIST DOT EDU
18.04.2002 16:07
Please respond to ADSM-L
To: ADSM-L AT VM.MARIST DOT EDU
cc:
Subject: Re: tsm database problem
Burak,
In that case, you have to unload the database and then reload it using
dsmserv unloaddb and dsmserv loaddb commands. So that your database is
reorganized and takes minimum space to distribute itself. I hope, after
doing unload and load database you will enough database space to reduce
and
then delete the database volume as per your wish.
Regards,
Mahesh Prasad
DCM Data Systems Limited
New Delhi, India
Burak Demircan
<burak.demircan@DAIMLERCHR To:
ADSM-L AT VM.MARIST DOT EDU
YSLER.COM> cc:
Sent by: "ADSM: Dist Stor Subject: Re: tsm
database problem
Manager"
<ADSM-L AT VM.MARIST DOT EDU>
04/18/2002 06:00 PM
Please respond to "ADSM:
Dist Stor Manager"
But I can reduce it only 60 MBs although it is only 23 percent used?
Regards,
Burak
mahesh AT COSMOS.DCMDS.CO DOT IN
Sent by: ADSM-L AT VM.MARIST DOT EDU
18.04.2002 15:26
Please respond to ADSM-L
To: ADSM-L AT VM.MARIST DOT EDU
cc:
Subject: Re: tsm database problem
Burak,
You have assigned all the database space available to the TSM Server. You
have to reduce the database size at least up to the size of the volume you
want to delete. When you use Delete dbvolume <volume_name> command the
data
already existing in that volume then automatically get moved to the other
volume. The bottom line is that you have to reduce equivalent size of the
assigned database space before deleting the volume. Reduce the Database
volume using this command,
REDUCE DB <SIZE_IN_MEGABYTE>
Regards,
Mahesh Prasad
DCM Data Systems Limited
New Delhi, India
Burak Demircan
<burak.demircan@DAIMLERCHR To:
ADSM-L AT VM.MARIST DOT EDU
YSLER.COM> cc:
Sent by: "ADSM: Dist Stor Subject: tsm
database
problem
Manager"
<ADSM-L AT VM.MARIST DOT EDU>
04/18/2002 05:21 PM
Please respond to "ADSM:
Dist Stor Manager"
Hi,
One of my TSM servers is TSM 4.2.2.0 on AIX 4.3.3
I have a 1.4GB database which is % 24 full as follows.
--------------------------------------------------------------------------------
-----
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- tsm database problem, Burak Demircan
- Re: tsm database problem, Niklas Lundstrom
- Re: tsm database problem, Mahesh Prasad
- Re: tsm database problem, Burak Demircan
- Re: tsm database problem, Kolbeinn Josepsson
- Re: tsm database problem, Cook, Dwight E
- Re: tsm database problem, Daniel Sparrman
- Re: tsm database problem, Burak Demircan
- Re: tsm database problem, Mahesh Prasad
- Re: tsm database problem, Burak Demircan
- Re: tsm database problem,
Daniel Sparrman <=
- Re: tsm database problem, Pope, Simon R.
- Re: tsm database problem, Burak Demircan
- Re: tsm database problem, David Longo
- Re: tsm database problem, Mahesh Prasad
|
|
|