ADSM-L

Re: Question about tape drive utilization and the summary file

2002-04-04 09:22:55
Subject: Re: Question about tape drive utilization and the summary file
From: Gabriel Wiley <wileyg AT US.IBM DOT COM>
Date: Thu, 4 Apr 2002 09:23:16 -0500
If all that does not work, try removing device and running cfgmgr again.

Maybe that tape drive is backlevel on microcode ?  I have run different
levels of microcode just to see if it had problems, 99% of the time it did
not..


Gabriel C. Wiley
ADSM/TSM Administrator
AIX Support
Phone 1-614-308-6709
Pager  1-877-489-2867
Fax      1-614-308-6637
Cell       1-740-972-6441

Siempre Hay Esperanza




                      "Williams, Tim P
                      {PBSG}"                  To:       ADSM-L AT VM.MARIST 
DOT EDU
                      <Tim.Williams@PBS        cc:
                      G.COM>                   Subject:  Re: Question about 
tape drive utilization and the summary file
                      Sent by: "ADSM:
                      Dist Stor
                      Manager"
                      <[email protected]
                      .EDU>


                      04/03/2002 06:40
                      PM
                      Please respond to
                      "ADSM: Dist Stor
                      Manager"





lsdev -Cc tape
can you see the drive?
Ted has a good idea...
q mount shows nothing?
q sess f=d shows no mount for that drive?
mtlib -l/dev/lmcp0 -qM  (query mount from aix if you have aix...) to look
for a mount on the operating
system level...
is the drive available at the 3494?
some ideas.


<Prev in Thread] Current Thread [Next in Thread>