Hi y´all

I am installing TSM 4.2.1.9 on Win NT, I have a Dell PowerVault 128T
library.

My problem is that when migrating from disk to tape I get this right away,
ANR0984I Process 28 for MIGRATION started in the BACKGROUND at 23:20:49.
ANR1000I Migration process 28 started for storage pool DISKPOOL.
ANR1134W Migration terminated for storage pool DISKPOOL - insufficient
number
of mount points available for removable media.
ANR0985I Process 28 for MIGRATION running in the BACKGROUND completed with
completion state FAILURE at 23:20:49.
ANR1002I Migration for storage pool DISKPOOL will be retried in 60 seconds.
ANR1003I Migration retry delay ended; checking migration status for storage
pool DISKPOOL.

However im able to label and checkin volumes without any problems

I have changed the mount limit from drives to 2 (update dev ltoclass1
libr=lb0.0.0.2 devtype=lto mountlimit=2). That changed nothing

My feeling is that im overlooking somthing in the config of the library or
drives

I also have a newer version of firmware then the one tested with TSM. 

Would changing OS´s do anything, go to W2K?

Best regards



 

Þórður Aðalsteinsson

MCSE, MCP+I

Margmiðlun Internet, Fyrirtækjaþjónusta

Suðurlandsbraut 4

105, Reykjavík

Sími 575 7000

e-mail: thordura AT margmidlun DOT is

www.mi.is