**********************************************************************
*** Tivoli Storage Manager (TSM) ***
*** Product Number 5697-TS9/5698-TSM ***
*** "Contains Restricted Materials of IBM" ***
*** (c) Copyright IBM Corporation 1990,2000 ***
*** Refer to copyright instructions ***
**********************************************************************
*
**********************************************************************
* *
* Sample MVS Server Options File *
* *
**********************************************************************
*
*--------------------------------------------------------------------*
* AuditStorage
* specifies that the storage is to be calculated as part of a storage
* audit. The default is yes
* Valid values: YES or NO
*--------------------------------------------------------------------*
auditstorage yes
*
*--------------------------------------------------------------------*
* Size of database buffer pool, in Kbytes.
*--------------------------------------------------------------------*
*>>> bufpoolsize 512
bufpoolsize 32768
*
*--------------------------------------------------------------------*
* Communication timeout value, in seconds.
* TEMPS D'ATTENTE MAXIMUM DU SERVEUR PAR RAPPORT ? UN CLIENT
*--------------------------------------------------------------------*
*>>> commtimeout 60
commtimeout 120
*
*--------------------------------------------------------------------*
* Date format to use.
* 1 = MM/DD/YYYY (default)
* 2 = DD-MM-YYYY
* 3 = YYYY-MM-DD
* 4 = DD.MM.YYYY
* 5 = YYYY.MM.DD
*--------------------------------------------------------------------*
*>>> dateformat 1
dateformat 4
*
*--------------------------------------------------------------------*
* DBPAGESHADOW
* specifies whether database page shadowing is enable
* This parameter works with the MIRRORWRITE DB PARALLEL
* Valid values: YES or NO
* the default is yes
*--------------------------------------------------------------------*
dbpageshadow no
*
*--------------------------------------------------------------------*
* DBPAGESHADOWFILE
* specifies the name of the file to use for database page shadowing
* This parameter works with the DBPAGESHADOW
*--------------------------------------------------------------------*
*>>>dbpageshadowfile 'EXPLOIT.TSM.PAGE.SHADOW1'
*
*--------------------------------------------------------------------*
* Deletion notification exit.
* specifies a user exit that receives control when a tape volume is
* deleted from the database
*--------------------------------------------------------------------*
*>>> deletionexit MVSexitName
deletionexit ARCTVEXT
*
*--------------------------------------------------------------------*
* DEVCONFIG
* ********************************************************************
* DEVCONFig <filename>
DEVCONFIG 'EXPLOIT.TSM.DEVCONF'
*
* Specifies the name of a file that should contain device
* configuration information when it is changed by the server.
* Device configuration information is used by the
* server processes during server database recovery or load and
* DSMSERV DUMPDB processing.
*
* More than one of these parameters may be specified to record
* device configuration information to multiple files.
*
* Syntax
* +------------------+----------------------------------------------+
* ! DEVCONFig ! filename !
* +------------------+----------------------------------------------+
*
* Parameters
* filename - a fully-qualified file name
* to which the server is to automatically
* record device configuration
* information when it changes.
*--------------------------------------------------------------------*
* DISABLESCHEDS
* Valid values: YES or NO
*--------------------------------------------------------------------*
disablescheds no
*
*--------------------------------------------------------------------*
* EVENTSERVERLOGGING
* specifies whether at startup the server should try to contact
* the event server
* Valid values: YES or NO
* the default is yes
*--------------------------------------------------------------------*
eventserver no
*
*--------------------------------------------------------------------*
* Inventory Expiration Interval (hours)
* Specifies the time in hours between automatic inventory expiration
* processing on the Server.
* interval de temps sur lequel l'action de purge des donnees (DB & SG)
* sera declenchee
* Si la valeur est 0 => utilisation de la commande expire
*--------------------------------------------------------------------*
*>>> expinterval 1
expinterval 0
*
*--------------------------------------------------------------------*
* EXPQUIET
* Valid values: YES or NO
* the default is yes
*--------------------------------------------------------------------*
expquiet no
*
*--------------------------------------------------------------------*
* FILEEXIT
* Valid values: YES or NO
*--------------------------------------------------------------------*
*>>>fileexit yes data.mt1.log replace
*
*--------------------------------------------------------------------*
* FILETEXTEXIT
* Valid values: YES or NO
*--------------------------------------------------------------------*
*>>>filetextexit yes data.mt1.log replace
*
*---------------------------------------------------------------*
* FIXEDIOBUFSIZE
* Valid values: 1 to 64 megabytes
* the default value is 0
*---------------------------------------------------------------*
*>>>fixediobufsize 0
*
*---------------------------------------------------------------*
* HPDTBUFFER#
* Valid values: 2 to 1024
* the default value is 6
*---------------------------------------------------------------*
*>>>hpdtbuffer# 6
*
*---------------------------------------------------------------*
* HPDTENABLE
* Valid values: YES or NO
*---------------------------------------------------------------*
*>>>hpdtenable no
*
*---------------------------------------------------------------*
* HPDTexpand#
* Valid values: 2 to 128
* the default value is 2
*---------------------------------------------------------------*
*>>>hpdtexpand# 2
*
*---------------------------------------------------------------*
* HPDTSTORAGE
* Valid values: ECSA or DATASpace
*---------------------------------------------------------------*
*>>>hpdtstorage ecsa
*
*---------------------------------------------------------------*
* HTTPICSPORT
* for interlink tcpaccess
*---------------------------------------------------------------*
*>>>HTTPICSPort 1580
*
*
*---------------------------------------------------------------*
* HTTP port number on which server will listen for the
* WEB administrator interface (Default is 1580)
* To disable HTTP communications set TCPName to *none*
* (For IBM TCP/IP)
*---------------------------------------------------------------*
HTTPTCPPort 1580
*
*--------------------------------------------------------------------*
* ICSport port number on which server will listen.
*--------------------------------------------------------------------*
*>>> icsport 1500
*
*--------------------------------------------------------------------*
* Name of ICS/IP subsystem
*--------------------------------------------------------------------*
*>>> icssname acss
*
*--------------------------------------------------------------------*
* Idle session timeout value, in minutes.
* TEMPS D'ATTENTE MAXIMUM DU SERVEUR LORS DE L'ETABLISSEMENT
* D'UNE SESSION AVEC UN CLIENT
*--------------------------------------------------------------------*
*>>> idletimeout 15
idletimeout 10
*
*--------------------------------------------------------------------*
* Start MVS IUCV driver.
* Possible operands are START or *NONE*
*--------------------------------------------------------------------*
*>>> iucv START
*
*---------------------------------------------------------------*
* Language for server messages.
* Valid values: curently, only AMENG is valid
*---------------------------------------------------------------*
LANGuage AMENG
*
*--------------------------------------------------------------------*
* LICENSE
* specifies the terms of your license agreement
*--------------------------------------------------------------------*
*>>> license DRM
license managedsyslan 80
*
*--------------------------------------------------------------------*
* Size of log buffer pool in Kbytes.
*--------------------------------------------------------------------*
*>>> logpoolsize 128
logpoolsize 512
*
*--------------------------------------------------------------------*
* LOGWARNFULLPERCENT
* Valid values: 0 to 98
* the default value is 90
*--------------------------------------------------------------------*
logwarnfullpercent 90
*
*--------------------------------------------------------------------*
* MVS VTAM ACB name.
*--------------------------------------------------------------------*
*>>> luname TIVSMLU
luname *NONE*
*
*--------------------------------------------------------------------*
* Maximum number of simultaneous client sessions.
*--------------------------------------------------------------------*
*>>> maxsessions 25
maxsessions 60
*
*--------------------------------------------------------------------*
* Message format to use
* 1 = The message number for a message is displayed only at the
* beginning of the message even if the message spans more than
* one display line
* 2 = The message number for a message is displayed at the beginning
* of each display line for messages that span display lines
*--------------------------------------------------------------------*
*>>> messageformat 1
messageformat 1
*
*--------------------------------------------------------------------*
* Specify how mirrored READS of the DATABASE are to be executed:
* normal - read any ONE mirrored volume to obtain desired page
* verify - read ALL mirrored volumes for the desired page and
* re-synchronize invalid pages if found
*--------------------------------------------------------------------*
*>>> mirrorread db normal
mirrorread db normal
*
*--------------------------------------------------------------------*
* Specify how mirrored READS of the RECOVERY LOG are to be executed:
* normal - read any ONE mirrored volume to obtain desired page
* verify - read ALL mirrored volumes for the desired page and
* re-synchronize invalid pages if found
*--------------------------------------------------------------------*
*>>> mirrorread log normal
*
*--------------------------------------------------------------------*
* Specify how mirrored WRITES of the DATABASE are to be executed:
* parallel - pages are written to mirrored volumes in parallel
* All mirrored volumes for a page obtain their new
* copy of the page at approximately the same time.
* sequential - pages are written successfully to one mirrored
* volume before other mirrored volumes are directed
* to write their page
*--------------------------------------------------------------------*
*>>> mirrorwrite db sequential
mirrorwrite db sequential
*
*--------------------------------------------------------------------*
* Specify how mirrored WRITES of the RECOVERY LOG are to be executed:
* parallel - pages are written to mirrored volumes in parallel
* All mirrored volumes for a page obtain their new
* copy of the page at approximately the same time.
* sequential - pages are written successfully to one mirrored
* volume before other mirrored volumes are directed
* to write their page
*--------------------------------------------------------------------*
*>>> mirrorwrite log parallel
*
*---------------------------------------------------------------*
* MOVEBATCHSIZE
* *************************************************************
MOVEBatchsize 32
*
* Specifies the maximum number of client files that can be
* grouped together in a batch within the same server
* transaction for storage pool backup/restore, migration,
* reclamation, or move data operations. Specifying a larger
* number may improve performance but will require more server
* recovery log space.
*
* Any number between 1 and 256 (inclusive) may be specified.
* The default is 40.
*
* This parameter works with the MOVESIZETHRESH parameter below,
* in the following manner:
*
* The number of client files moved for each server database
* transaction during a server storage pool backup/restore,
* migration, reclamation or move data operation will be
* determined by the number and size of the file in the batch.
* If the number of files in the batch becomes equivalent to
* the MOVEBATCHSIZE before the cumulative size of the files
* becomes greater than the MOVESIZETHRESH, then the
* MOVEBATCHSIZE is used to determine the number of files moved
* or copied in the transaction. If the cumulative size of
* files being gathered for a move or copy operation exceeds
* the MOVESIZETHRESH value before the number of files becomes
* equivalent to the MOVEBATCHSIZE, then the MOVESIZETHRESH
* value is used to determine the number of files moved or
* copied in the transaction.
*
* Syntax
* +------------------+----------------------------------------+
* ! MOVEBatchsize ! nnn !
* +------------------+----------------------------------------+
*
* Parameters
* nnn - the number of files that should
* be batched in the same server
* transaction for server storage
* pool backup/restore, migration,
* reclamation, or move data
* operations.
* Values: 1-256 Default: 40
* ==============================================================
*
* MOVESIZETHRESH
* *************************************************************
MOVESizethresh 1
*
* Specifies a threshold, in megabytes, for the amount of data
* moved as a batch within the same server transaction for
* storage pool backup/restore, migration, reclamation, or move
* data operations. When this threshold is reached, no more
* files are added to the current batch,and a new server
* transaction is started after the batch is moved.
*
* Specifying a larger number may improve performance but will
* require more server recovery log space.
*
* Any number between 1 and 500 (inclusive) may be specified.
* The default is 500 (megabytes).
*
* This parameter works with the MOVEBATCHSIZE parameter above,
* in the following manner:
*
* The number of client files moved for each server database
* transaction during a server storage pool backup/restore,
* migration, reclamation or move data operation will be
* determined by the number and size of the files in the batch.
* If the number of files in the batch becomes equivalent to the
* MOVEBATCHSIZE before the cumulative size of the files becomes
* greater than the MOVESIZETHRESH, then the MOVEBATCHSIZE is
* used to determine the number of files moved or copied in the
* transaction. If the cumulative size of files being gathered
* for a move or copy operation exceeds the MOVESIZETHRESH value
* before the number of files becomes equivalent to the
* MOVEBATCHSIZE, then the MOVESIZETHRESH value is used to
* determine the number of files moved or copied in the
* transaction.
*
* Syntax
* +------------------+----------------------------------------+
* ! MOVESizethresh ! nnn !
* +------------------+----------------------------------------+
*
* Parameters
* nnn - the threshold in megabytes for
* data that may be batched in the
* same server transaction for server
* storage pool backup/restore,
* migration, reclamation, or move
* data operations.
*
* Values: 1-500 Default: 500
*
*--------------------------------------------------------------------*
* MPTHREADING
* Valid values: YES or NO
*--------------------------------------------------------------------*
mpthreading yes
*
*--------------------------------------------------------------------*
* MSGHILIGHT
* Valid values: 0 to 4
*--------------------------------------------------------------------*
msghighlight 0
*
*---------------------------------------------------------------*
* Suppress displaying messages, based on message severity level:
* 0 = no messages are suppressed
* 1 = all informational messages are suppressed
* 2 = all informational and warning messages are suppressed
*---------------------------------------------------------------*
MSGSUppress 0
*
*---------------------------------------------------------------*
* NOPREEMPT
*
*---------------------------------------------------------------*
*>>>nopreempt
*
*---------------------------------------------------------------*
* NORETRIEVEDATE
*
*---------------------------------------------------------------*
*>>>noretrievedate
*
*--------------------------------------------------------------------*
* Number format to use.
* the default value is 1
* thousand seperator decimal point seperator
* 1 = ',' '.' (default)
* 2 = ',' ','
* 3 = ' ' ','
* 4 = ' ' '.'
* 5 = '.' ','
* 6 = ''' ','
*--------------------------------------------------------------------*
*>>> numberformat 1
numberformat 3
*
*---------------------------------------------------------------*
* PDMCONNECT
* Valid values: PDM or TCP
*---------------------------------------------------------------*
*>>>pdmconnect tcp
*
*---------------------------------------------------------------*
* PDMNAME
* the default value is *NONE*
*---------------------------------------------------------------*
*>>>pdmname dmes
pdmname *NONE*
*
*---------------------------------------------------------------*
* PDMPORT
* This port is not a TCP/IP port on the system.It is a logical
* port for infospeed exPress Data Mover uses exclusively.
*---------------------------------------------------------------*
*>>>pdmport 1508
*
*---------------------------------------------------------------*
* QUERYAUTH
* Specifies the administrative authority level required to issue QUERY
* or SQL SELECT
* Valid values: none,system,policy,storage,operator,analyst
*---------------------------------------------------------------*
queryauth none
*
*---------------------------------------------------------------*
* REQSYSAUTHOUTFILE
* Valid values: yes or no
*---------------------------------------------------------------*
reqsysauthoutfile no
*
*---------------------------------------------------------------*
* RESTOREINTERVAL
* Valid values: 0 to 10080
* the default value is 1440 (24hours)
*---------------------------------------------------------------*
restoreinterval 1440
*
*---------------------------------------------------------------*
* MVS WTO route code for server messages.
* Valid values: 1 to 12
*---------------------------------------------------------------*
ROUTECode 11
*
*---------------------------------------------------------------*
* SEARCHMPQUEUE
* Specifies the order in which the server satifies requestsc in
* the mount queue.
*---------------------------------------------------------------*
searchmpqueue
*
*---------------------------------------------------------------*
* SELFTUNEBUFPOOLSIZE
* Specifies wether TSM can automatically tune the database
* buffer pool size
* Valid values: YES or NO
* the default value is NO
*---------------------------------------------------------------*
selftunebufpoolsize no
*
*---------------------------------------------------------------*
* SelfTuneTxnSize
* Specifies wether TSM can automatically changethe values of the
* TXNGROUPMAX, MOVEBATCHSIZE, MOVESIZETHRESH
* Valid values: YES or NO
*---------------------------------------------------------------*
SELFTUNETXNSIZE no
*
*---------------------------------------------------------------*
* TAPEIOBUFS
* Specifies how many tape I/O buffers the server can use to write
* or read from a tape media
* Valid values: 1 to 9
* the default value is 1
*---------------------------------------------------------------*
tapeiobufs 1
*
*---------------------------------------------------------------*
* TCPBUFSIZE
* Valid values: 4 to 32
* the default value is 32
*---------------------------------------------------------------*
tcpbufsize 32
*
*--------------------------------------------------------------------*
* Name of TCP/IP subsystem
*--------------------------------------------------------------------*
*>>> tcpname TCPIP
tcpname TCPIP
*
*--------------------------------------------------------------------*
* TCP/IP port number on which server will listen.
*--------------------------------------------------------------------*
*>>> tcpport 1500
tcpport 1500
*
*---------------------------------------------------------------*
* TECBEGINEVENTLOGGING
* If the TECHOST option is specified, TECBEGINEVENTLOGGING defaults
* to YES
* Valid values: YES or NO
*---------------------------------------------------------------*
tecbegineventlogging no
*
*---------------------------------------------------------------*
* TECHOST
* Specifies the IP address for the Tivoli event server
*---------------------------------------------------------------*
*>>>techost 45.91.xxxxxxx
*
*---------------------------------------------------------------*
* TECPORT
* Specifies the TCP/IP port address for the Tivoli event server
* Valid values: 0 to 32767
*---------------------------------------------------------------*
*>>>tecport 1555
*
*---------------------------------------------------------------*
* THROUGHPUTDATATHRESHOLD
* This option is used with THROUGHPUTTIMETHRESHOLD
* Valid values: 0 to 99999999
* the default value is 0
*---------------------------------------------------------------*
throughputdatathreshold 0
*
*---------------------------------------------------------------*
* THROUGHPUTTIMETHRESHOLD
* This option is used with THROUGHPUTDATETHRESHOLD
* Valid values: 0 to 99999999
* the default value is 0
*---------------------------------------------------------------*
throughputtimethreshold 0
*
*-------------------------------------------------------------------*
* Time format to use.
* 1 = HH:MM:SS (default)
* 2 = HH,MM,SS
* 3 = HH.MM.SS
* 4 = HH:MM:SSA and HH:MM:SSP (12 hours)
*-------------------------------------------------------------------*
*>>> timeformat 1
timeformat 1
*
*---------------------------------------------------------------*
* TXNGroupmax
* Number of files transferred as a group between the client and
* server.
* Valid values: 4 to 256
* Faire un test en positionnant SELFTUNETXNSIZE ? YES
*---------------------------------------------------------------*
TXNGroupmax 256
*
*---------------------------------------------------------------*
* USELARGEBUFFERS
* Valid values: YES or NO
* the default value is YES
*---------------------------------------------------------------*
uselargebuffers yes
*
*---------------------------------------------------------------*
* USEREXIT
* Valid values: YES or NO module_name language
*---------------------------------------------------------------*
*>>>userexit no adsmv3ux c
*
*---------------------------------------------------------------*
* VOLUMEHISTORY
* ******************************************************************
* VOLUMEHistory <filename>
VOLUMEHISTORY 'EXPLOIT.TSM.HISTORY'
*
* Specifies the name of a file that should contain sequential
* volume history information when it is changed by the server.
* Sequential volume history information is used by the administrator
* and server processes during server database recovery.
*
* More than one of these parameters may be specified to record
* sequential volume history information to multiple files
*
* Syntax
* +------------------+----------------------------------------------+
* ! VOLUMEHistory ! filename !
* +------------------+----------------------------------------------+
*
* Parameters
* filename - a fully-qualified file name
* to which the server is to automatically
* record volume history information
* when it changes
*---------------------------------------------------------------*
|
