Hi,
Try to go through these steps, I think it will help.
ANR8840E Unable to open device device name with error error number.
Explanation: The library was inaccessible, thus causing a open request to
fail. This will inturn cause the pending request to fail.
System Action: A drive is marked inaccessible and the server starts polling
the drive to determine if the library and drive are inaccessable. In most
case, the libary had a temporary failure and recovers. When the server
determines that the library is available, the drive will be brought back
online.
User Response: Verify the library is online. Verify cable connections
between the library and the server. If the problem persists contact your
service representative.
------------------------------------------------------------------------------
-----
ANR8826E No Entry/Exit found on library library name.
ANR8826E No Entry/Exit found on library library name.
Explanation: A CHECKIN LIBVOLUME SEARCH=BULK command was issued on a library
that has no Entry/Exit ports.
System Action: None.
User Response: None.
Üdv,
Sótonyi Attila mailto:sotonyi AT mavinformatika DOT hu
Rendszermérnök
MÁV Informatika Kft.
Tel.:06(1)457-9372
------------------------------------------------------------
> Hi all,
> Hi all,
> We have a -:
> 3584 Fibre attached library with 3 LTO drives in it.
> TSM server is NT4 SP6a, TSM Version 4.2.1.6.
> Server has been running for three weeks at this level....
> The server crashed today with Dr Watson error.
> Library and Server were shut down and restarted.
> The library has come up and all tape drives / diagnostics run fine.
> The Server has come up and it can see the Library and Tape drives from
> operating system level.
> Q drive and Q server respond saying drives and library are online.
> Sessions are connecting to the server, I can do incremental database backups
> etc..
> When I try to do a check out / or check in of a tape (or load on into tape
> drive) I get error -:
> ANR8840E Unable to open device LB1.1.0.3 with error -1
> ANR8826E No Entry/Exit found on library LB1.1.0.3
> Basically - Server can not send commands to tape library.
> Has anybody run across this problem before, have any helpful hints ?
> Thanks for any ideas you have.
> Martin Meldrum.
> SIC (Systems Integration Consultant),
> SIS (Systems Integration Support) Team
> Norwich Union Australia Ltd
> Ph 03 9829 8703
> Mbl 0407 920 739
> Fax 03 9829 8147
> ***********************************************************************************
> This email and any files transmitted with it are confidential and
> intended solely for the use of the individual or entity to whom they
> are addressed. If you have received this email in error please let us
> know by reply email or phone and delete all copies from your computer
> system.
> ***********************************************************************************
|