ADSM-L

Re: SCSI Channel to LTO drive rule of thumb

2001-12-20 11:49:51
Subject: Re: SCSI Channel to LTO drive rule of thumb
From: "Orville L. Lantto" <orville.lantto AT DTREND DOT COM>
Date: Thu, 20 Dec 2001 10:44:52 -0600
Don't forget to factor in drive compression.  I have seen 4 to 1, which
requires 60 MB/sec bandwidth to keep the LTO drive streaming.  (If an LTO
doesn't stream, figure 1.5 to 6 MB/sec before compression, depending on
file size)

Orville L. Lantto
Datatrend Technologies, Inc.
121 Cheshire Lane #700
Minnetonka, MN 55305
Email: orville.lantto AT dtrend DOT com
V: 952-931-1203
F: 952-931-1293
C: 612-770-9166




"Taylor, David" <DTaylor AT WBMI DOT COM>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
12/20/01 09:20 AM
Please respond to "ADSM: Dist Stor Manager"


        To:     ADSM-L AT VM.MARIST DOT EDU
        cc:
        Subject:        SCSI Channel to LTO drive rule of thumb


Hi *,

Can anyone share with me, a good rule-of-thumb for the maximum number of
LTO
drives that should be attached to a single Ultra-II SCSI bus?   Using the
theoretical max transfer rates of 15 MB/s for the drives and 80 MB/s for
the
SCSI, I shoould be able to put 5 drives on one bus and still have room to
spare (theoretically).    What is the generally accepted maximum number,
in
the real world?

TIA

David Taylor



**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.

This footnote also confirms that this email message has been swept by
MIMEsweeper for the presence of computer viruses.

www.mimesweeper.com
**********************************************************************
<Prev in Thread] Current Thread [Next in Thread>