Thanks for your help

 Both the dsmsnmp and the dpid2 processes are running, but no snmp traps
received yet!:

ps -ef | grep snmp
    root 22896  9548   0   Nov 21      -  0:33 /usr/sbin/snmpd
    root 23232 56828   0 15:47:32 pts/16  0:00 ./dsmsnmp
    root 24258 23232   0 15:47:32 pts/16  0:00 ./dsmsnmp
    root 39198 45362   1 09:09:05 pts/19  0:00 grep snmp

ps ef | grep dpid2
    root  7012  9548   0   Jun 18      -  0:03 /usr/sbin/dpid2
    root 25710 45362   0 09:21:47 pts/19  0:00 grep dpid


   ....do you have your "dsmsnmp" agent running ? ? ? (found in the server
   install
   directory)from your messages, it looks like you probably don't have the
   dsmsnmp agent
   running...

   ....Is the DPID2 process running? As far as I understand, the
   communication goes
   like this:

   TSM -> DSMSNMP -> DPID2 -> SNMPD



   Patrick Varney
   Pacific Gas & Electric Company
   Fairfield Information Operations Center (FFIOC)
   Enterprise Services  Group (ESG), Senior Network Specialist

   -----Original Message-----
   From: Robert Dowsett [mailto:Robert.Andrew.Dowsett AT HYDRO DOT COM]
   Sent: Tuesday, November 27, 2001 7:14 AM
   To: ADSM-L AT VM.MARIST DOT EDU
   Subject: Problem sending SNMP traps


   Hi everyone

   I have recently been trying to set up eventlogging on TSM via SNMP.

   Our setup:
   TSM server 3.7.5, aix 4.3.3

   I've added dsmserv.opt to include commethod snmp and the snmpsubagent
   parameter points to the local host (where snmpd runs) using a configured
   community name.

   I ran:  begin eventlogging & enable event snmp all
   q eventrules gives the following:
   enable events snmp all


   The dsmsnmp process is running and is, I believe, successfully
   communicating with the agent (snmpd).
   Snmpd is successfully sending out non-TSM traps which get collected by
   the
   trapd on our monitoring system.

   We receive NO events from TSM via SNMP.

   TSM seems to have a problem maintaining a connection with the subagent
   (using port 1521). According to netstat port 1521 is not in use by any
   other process. We get these error messages (repeating every 5 minutes
   for
   roughly one hour) when we restart the TSM server:

   11/21/01   15:08:41      ANR4660I Connected to SNMP subagent at
   127.0.0.1
   on port
                             1521.
   11/21/01   15:08:41      ANR4663W Failure receiving message from SNMP
   subagent.
   11/21/01   15:08:41      ANR4664W Failure in registering with SNMP
   subagent.
   11/21/01   15:13:41      ANR4660I Connected to SNMP subagent at
   127.0.0.1
   on port
                             1521.
   11/21/01   15:13:41      ANR4663W Failure receiving message from SNMP
   subagent.
   11/21/01   15:13:41      ANR4665W Failure re-trying registration with
   SNMP
                             subagent.

   Has anyone got any ideas or suggestions as to why TSM is not sending out
   events as SNMP traps??

   Thanks in advance for your help

   Robert Dowsett
   Norsk Hydro