Hi everyone

I have recently been trying to set up eventlogging on TSM via SNMP.

Our setup:
TSM server 3.7.5, aix 4.3.3

I've added dsmserv.opt to include commethod snmp and the snmpsubagent
parameter points to the local host (where snmpd runs) using a configured
community name.

I ran:  begin eventlogging & enable event snmp all
q eventrules gives the following:
enable events snmp all


The dsmsnmp process is running and is, I believe, successfully
communicating with the agent (snmpd).
Snmpd is successfully sending out non-TSM traps which get collected by the
trapd on our monitoring system.

We receive NO events from TSM via SNMP.

TSM seems to have a problem maintaining a connection with the subagent
(using port 1521). According to netstat port 1521 is not in use by any
other process. We get these error messages (repeating every 5 minutes for
roughly one hour) when we restart the TSM server:

11/21/01   15:08:41      ANR4660I Connected to SNMP subagent at 127.0.0.1
on port
                          1521.
11/21/01   15:08:41      ANR4663W Failure receiving message from SNMP
subagent.
11/21/01   15:08:41      ANR4664W Failure in registering with SNMP
subagent.
11/21/01   15:13:41      ANR4660I Connected to SNMP subagent at 127.0.0.1
on port
                          1521.
11/21/01   15:13:41      ANR4663W Failure receiving message from SNMP
subagent.
11/21/01   15:13:41      ANR4665W Failure re-trying registration with SNMP
                          subagent.

Has anyone got any ideas or suggestions as to why TSM is not sending out
events as SNMP traps??

Thanks in advance for your help

Robert Dowsett
Norsk Hydro