TDP for R/3 uses the API and not the client; the dsm.sys and dsm.opt it's
looking for should be under /usr/tivoli/tsm/client/api/bin; you can create
symlinks to the files in ba/bin, or copy the files to api/bin. I've found
seperate copies to give a bit more flexability at times.
Tom Kauffman
NIBCO
> -----Original Message-----
> From: Eugene Awyong - Singapore [mailto:eawyong AT SAPL.SAMSUNG DOT COM]
> Sent: Tuesday, September 25, 2001 4:10 AM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: Antw: Setup for R3 TDP Problem
>
>
> Hi Thida,
>
> Thanks for the advice, I tried running the below
> commands and this
> is what I got.
>
> pv_devt:svdadm 2> backint -p /oracle/SVD/dbs/initSVD.utl -f password
>
> Tivoli Data Protection for SAP R/3
>
> Interface between SAPDBA Utilities and Tivoli
> Storage Manager
> - Version 2, Release 4, Level 25.5 for AIX LF -
> (c) Copyright IBM Corporation, 1996, 1999, All Rights
> Reserved.
>
> Program Number : 5697-DPR
>
>
> BKI0005I: Start of backint program at: Tue Sep 25 17:01:57 2001.
> BKI0038I: Changing password for server pv_devt_client.
> BKI0033I: Please give the password for the Tivoli Storage
> Manager-Server.
> BKI0034I: Enter your Tivoli Storage Manager-Server password:
> BKI0035I: Enter your Tivoli Storage Manager-Server password again:
> BKI0018E: There is a problem with Tivoli Storage Manager-Server
> 'pv_devt_client' :
> 'ANS1035S (RC406) Options file not found'
> BKI0020I: End of backint program at: Tue Sep 25 17:02:08 2001.
> BKI0021I: Elapsed time: 11 sec.
>
> pv_devt:svdadm 3> env |grep dsm
> DSM_CONFIG=/usr/tivoli/tsm/client/ba/bin/dsm.opt
> pv_devt:svdadm 4>
>
> I really have no idea what is happening now. As you
> can see, my
> DSM_CONFIG has already been set. :-( Any ideas guys?
>
> Thanks in Advance
>
> -----Original Message-----
> From: Thida Chin [mailto:thida.t.chintawongvanich AT SSI.SHELL.COM DOT MY]
> Sent: Tuesday, September 25, 2001 3:27 PM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: Antw: Setup for R3 TDP Problem
>
>
> Hi wolfgang,
> Try to run this command:
> backint -p /oracle/X35/dbs/initX35.utl -f password
> It's for reset your client password as what you want...
>
> From my experience, it's need to do on sometimes that you have change
> somethings in dsm.sys( just key in the password that you want
> to set...it
> can be always the same)
> -Make sure dsm.sys in that directory that you have mention is
> the same as in
> tdpr3 directory ( use "find" command to find the full path)
> -the "restore" under the line #MAX_RESTORE_SESSIONS 1
> # 1 Tivoli
> Storage Manager....... I'm not sure is this
> correct....normally we either
> comment it out or put "MAX_RESTORE_SESSION 1"
> hope this help
>
>
>
> regards,
>
> Thida Chintawongvanich
>
> SAP Infrastructure Support Team (SITI-ISPS/31)
> Shell Information Technology International Sdn., Bhd.
> ___________________________________________________________
> 2340 Century Square
> Jln Ushawan 63000 Cyberjaya, Kuala Lumpur, Malaysia
> (Tel : +603 8313 3446 : Fax : +603 251 2788 )
> *Personal EMail : T.chintawongvanich AT shell DOT com
> *Group EMail : ITS_AsiaPacific AT ssi.shell.com DOT my
>
> -----Original Message-----
> From: Wolfgang Herkenrath [mailto:w.herkenrath AT LVR DOT DE]
> Sent: Tuesday, September 25, 2001 4:06 PM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Antw: Setup for R3 TDP Problem
>
> Hi Eugene,
>
> have you updated the password for TDP? As far as I know you
> have to set it
> for the first time.
>
> Wolfgang
>
> >>> Eugene Awyong - Singapore <eawyong AT SAPL.SAMSUNG DOT COM>
> 25.09.01 01:43:42
> >>>
> Hi,
> I am having some problems setting up my TDP for R/3.
> The server does
> not seem to be able to brarchive due to the wrong password of. I have
> checked the setup of other servers, and everything seems the
> same. I can go
> into dsmc and do a query schedule for nodename pv_devt. Could
> someone let me
> know what I should be doing right.
>
> I have tried changing passwordaccess=prompt to
> generate, but both do
> not work, I have tried removing the /etc/security/adsm directory and
> generating a new password through dsmc and going back to
> PROMPT it still
> does not work. why am i getting the authentication failures? My other
> servers seem to be doing brarchive without any problems.
> Would appreciate it
> if someone could let me know.
>
> Many Thanks in Advance! :-)
>
>
>
>
> root@pv_devt:/usr/tivoli/tsm/client/ba/bin] pg dsm.opt
> **************************************************************
> **********
> * Tivoli Distributed Storage Manager
> *
> *
> *
> * Sample Client User Options file for AIX and SunOS
> (dsm.opt.smp) *
> **************************************************************
> **********
>
> * This file contains an option you can use to specify the Tivoli
> * server to contact if more than one is defined in your client
> * system options file (dsm.sys). Copy dsm.opt.smp to dsm.opt.
> * If you enter a server name for the option below, remove the
> * leading asterisk (*).
>
> * For information about additional options you can set in this file,
> * see the options.doc file in the directory where Tivoli was
> installed.
>
> **************************************************************
> **********
>
> SErvername pv_devt
>
> root@pv_devt:/usr/tivoli/tsm/client/ba/bin] pg dsm.sys
> **************************************************************
> **********
> * Tivoli Distributed Storage Manager
> *
> *
> *
> * Sample Client System Options file for AIX and SunOS
> (dsm.sys.smp) *
> **************************************************************
> **********
>
> * This file contains the minimum options required to get started
> * using TDSM. Copy dsm.sys.smp to dsm.sys. In the dsm.sys file,
> * enter the appropriate values for each option listed below and
> * remove the leading asterisk (*) for each one.
>
> * If your client node communicates with multiple TDSM servers, be
> * sure to add a stanza, beginning with the SERVERNAME option, for
> * each additional server.
>
> * For information about additional options you can set in this file,
> * see the options.doc file in the directory where TDSM was installed.
>
> **************************************************************
> **********
> SErvername pv_devt
> COMMmethod TCPip
> TCPPort 1500
> TCPServeraddress 107.10.86.2
> PASSWORDACCESS GENERATE
> TCPWindowsize 1024
> TCPBuffsize 32
> TCPNoDelay Yes
> Compression Off
> nodename pv_devt
>
> SErvername pv_devt_client
> COMMmethod TCPip
> TCPPort 1500
> TCPServeraddress 107.10.86.2
> PASSWORDACCESS PROMPT
> TCPWindowsize 1024
> TCPBuffsize 32
> TCPNoDelay Yes
> Compression Off
> nodename pv_devt
>
> root@pv_devt:/usr/tivoli/tsm/client/ba/bin] ls -l /etc/security/adsm
> total 8
> -rw------- 1 root system 80 Sep 24 19:52 PV_DEVT
> root@pv_devt:/usr/tivoli/tsm/client/ba/bin]
>
>
>
> root@pv_devt:/sysadmin/bkup/bin] arch_backup
> BR002I BRARCHIVE 3.1I (22)
> BR006I Start of offline redo log processing: adghihab svd 2001-09-24
> 20.02.37
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_10.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_11.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_12.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_13.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_14.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_15.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_16.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_17.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_18.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_19.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_20.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_21.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_22.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_23.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_24.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_25.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_26.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_27.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_28.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_29.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_30.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_31.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_32.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_33.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_34.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_35.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_36.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_37.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_38.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_39.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_40.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_41.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_42.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_43.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_44.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_45.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_46.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_47.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_48.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_49.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_50.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_51.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_52.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_53.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_54.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_55.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_56.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_57.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_58.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_59.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_60.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_61.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_62.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_63.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_64.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_65.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_66.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_67.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_68.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_69.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_70.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_71.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_72.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_73.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_74.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_75.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_76.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_77.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_78.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_79.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_80.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_81.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_82.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_83.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_84.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_85.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_86.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_87.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_88.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_89.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_90.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_91.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_92.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_93.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_94.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_95.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_96.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_97.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_98.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_99.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_100.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_101.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_102.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_103.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_104.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_105.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_106.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_107.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_108.dbf not found.
> BR017W Offline redo log file
> /oracle/SVD/saparch/SVDarch1_109.dbf not found.
>
> BR280I Time stamp 2001-09-24 20.02.38
> BR008I Offline redo log processing for database instance: SVD
> BR009I BRARCHIVE action ID: adghihab
> BR010I BRARCHIVE function ID: svd
> BR011I 82 offline redo log files found for processing, total
> size 1553.121
> MB.
> BR130I Backup device type: util_file
> BR109I Files will be saved by backup utility at file level.
> BR126I Unattended mode active - no confirmation required.
>
> BR280I Time stamp 2001-09-24 20.02.38
> BR229I Calling backup utility...
> BR278I Command output of '/usr/sap/SVD/SYS/exe/run/backint -u
> SVD -f backup
> -i /oracle/SVD/sapbackup/.adghihab.lst -t file -p
> /oracle/SVD/dbs/initSVD.utl -c':
>
> Tivoli Data Protection for SAP R/3
>
> Interface between SAPDBA Utilities and Tivoli
> Storage Manager
> - Version 2, Release 4, Level 25.5 for AIX LF -
> (c) Copyright IBM Corporation, 1996, 1999, All Rights
> Reserved.
>
> Program Number : 5697-DPR
>
>
> BKI0018E: There is a problem with Tivoli Storage Manager-Server
> 'pv_devt_client' :
> Authentication failure. You entered an incorrect password.
> 'ANS1025E (RC137) Session rejected: Authentication
> failure'BKI0017E: There
> are no Tivoli Storage Manager-Servers available.
> BKI0016E: Not enough sessions available (1 required and 0 available).
> BKI0121E: If you want 1 REDOLOGCOPIES on the Tivoli Storage
> Manager-Servers
> used
> you should give me at least 1 different Archive Management
> Classes.
>
> -- Parameters --
> Input File : /oracle/SVD/sapbackup/.adghihab.lst
> Output File : stdout
> Profile : /oracle/SVD/dbs/initSVD.utl
> Configfile : /oracle/SVD/dbs/initSVD.bki
> Manual sorting file: disabled
> Tracefile : none
> Traceflags : disabled
> Parallel sessions : 1
> Multiplexed files : 1
> RL compression : disabled
> Exit on error : disabled
> BATCH : enabled
> Redologcopies : 1
> Versioning : enabled
> Current Version : 2
> Backup Type : N/A
> SNMPTRAP : disabled
> Performance Monitor: disabled
> ADSM log server : disabled
> ADSM server : [pv_devt_client]
>
>
> BKI0020I: End of backint program at: Mon Sep 24 20:02:40 2001.
> BKI0018E: There is a problem with Tivoli Storage Manager-Server
> 'pv_devt_client' :
> Authentication failure. You entered an incorrect password.
> ANS1025E (RC137) Session rejected: Authentication failure
> BKI0021I: Elapsed time: 02 sec.
> BR279E Return code from '/usr/sap/SVD/SYS/exe/run/backint -u
> SVD -f backup
> -i /oracle/SVD/sapbackup/.adghihab.lst -t file -p
> /oracle/SVD/dbs/initSVD.utl -c': 2
>
> BR232E 0 of 82 files saved by backup utility.
> BR231E Backup utility call failed.
>
> BR016I 0 offline redo log files processed, total size 0.000 MB.
>
> BR007I End of offline redo log processing: adghihab svd
> 2001-09-24 20.02.43
> BR005I BRARCHIVE terminated with errors.
> root@pv_devt:/sysadmin/bkup/bin]
>
> root@pv_devt:/sysadmin/bkup/bin] dsmc
> Tivoli Storage Manager
> Command Line Backup Client Interface - Version 4, Release 1, Level 2.0
> (C) Copyright IBM Corporation, 1990, 2000, All Rights Reserved.
>
> tsm> q sched
> Node Name: PV_DEVT
> Session established with server SAPROD: AIX-RS/6000
> Server Version 4, Release 1, Level 3.0
> Server date/time: 09/24/01 20:11:55 Last access:
> 09/24/01 20:09:25
>
> There are no schedules associated with this node.
> tsm>
>
>
> root@pv_devt:/oracle/SVD/dbs] cat initSVD.utl
> #-------------------------------------------------------------
> -------------
> #
> # Tivoli Data Protection for SAP R/3 interface for SAP R/3 for ORACLE
> #
> # Sample profile for Tivoli Data Protection for SAP R/3
> 2.4.X.0 for UNIX
> #
> #-------------------------------------------------------------
> -------------
> #
> # This file should be renamed to $ORACLE_HOME/dbs/init$ORACLE_SID.utl
> # where $ORACLE_HOME is the home directory of the Oracle database and
> # $ORACLE_SID is the system ID of the Oracle database.
> # Default is 'oracle/C21/initC21.utl'.
> #
> # See the 'Program Description and Installation' manual for a full
> # description.
> #
> # For comment symbol the character '#' can be used.
> # Everything following this character will be interpreted as comment.
> #
> # Tivoli Data Protection for SAP R/3 V2 accesses its profile
> in "read only"
> # mode only. All variable parameters like passwords, date of last
> # password change, current version number will be written
> into the file
> # specified with the CONFIG_FILE parameter. The passwords
> will be encrypted.
>
>
> #-------------------------------------------------------------
> -------------
> # Prefix of the 'Backup ID' which will be used for
> communication with SAPDBA
> # and stored in the description field of the Tivoli Storage
> Manager archive
> # function.
> # Default: SAP___. Maximum 6 characters.
> #-------------------------------------------------------------
> -------------
> BACKUPIDPREFIX SVD___
>
>
> #-------------------------------------------------------------
> -------------
> # Number of total parallel sessions which will be established
> by Tivoli Data
> # Protection for SAP R/3. Note: this number should correspond with the
> number
> # of simultaneously available tape drives specified for the
> Tivoli Storage
> # Manager server.
> # Default: none.
> #-------------------------------------------------------------
> -------------
> MAX_SESSIONS 1 # 1 Tivoli Storage Manager client
> session is default
>
>
> #-------------------------------------------------------------
> -------------
> # Number of parallel sessions which will be established by Tivoli Data
> # Protection for SAP R/3 for the database backup.
> # Note: this number should correspond with the number of
> simultaneously
> # available tape drives specified for the Tivoli Storage
> Manager server.
> # Default: none.
> #-------------------------------------------------------------
> -------------
> #MAX_BACK_SESSIONS 1 # 1 Tivoli Storage Manager client
> session for backup
>
>
> #-------------------------------------------------------------
> -------------
> # Number of parallel sessions which will be established by Tivoli Data
> # Protection for SAP R/3 for the archive log backup.
> # Note: this number should correspond with the number of
> simultaneously
> # available tape drives specified for the Tivoli Storage
> Manager server.
> # Default: none.
> #-------------------------------------------------------------
> -------------
> #MAX_ARCH_SESSIONS 1 # 1 Tivoli Storage Manager client
> session for archive
>
>
> #-------------------------------------------------------------
> -------------
> # Number of parallel sessions which will be established by Tivoli Data
> # Protection for SAP R/3 for the restore of files.
> # Note: this number should correspond with the number of
> simultaneously
> # available tape drives specified for the Tivoli Storage
> Manager server.
> # Default: none.
> #-------------------------------------------------------------
> -------------
> #MAX_RESTORE_SESSIONS 1 # 1 Tivoli Storage Manager client session for
> restore
>
>
> #-------------------------------------------------------------
> -------------
> # Complete path and program name of the Tivoli Data Protection for
> # SAP R/3 Agent program. Default for name: backagent.
> #-------------------------------------------------------------
> -------------
> BACKAGENT /sapmnt/SVD/exe/backagent
>
>
> #-------------------------------------------------------------
> -------------
> # Number of backup copies of the archived redo logs.
> # Default: 1.
> #-------------------------------------------------------------
> -------------
> REDOLOG_COPIES 1 # 1 is default
>
>
> #-------------------------------------------------------------
> -------------
> # Specifies whether Tivoli Data Protection for SAP R/3 should
> perform a
> # null block compression of the data before they are
> transmitted over the
> # network to Tivoli Storage Manager. The null block
> compression consumes
> # only little cpu resources. This compression in Tivoli Data
> Protection for
> # SAP R/3 is independent from the Tivoli Storage Manager compression.
> # Do not compress twice !
> # Default: NO
> #-------------------------------------------------------------
> -------------
> #RL_COMPRESSION YES # NO is default
>
>
> #-------------------------------------------------------------
> -------------
> # Specifies how many files are multiplexed into one data stream
> # to a Tivoli Storage Manager server. Multiplexing is usefull
> when the data
> # rate to a Tivoli Storage Manager server is higher (fast tapes, fast
> network)
> # than the I/O rate from a single disk.
> # The valid range of MULTIPLEXING is from 1 to 8.
> # Default: 1 (meaning no multiplexing)
> #-------------------------------------------------------------
> -------------
> #MULTIPLEXING 3 # 1 is default
>
>
> #-------------------------------------------------------------
> -------------
> # Specifies the block size for disk I/O (in bytes). The valid range is
> # from 4 KB to 256 KB.
> # The default values have been chosen from our performance
> experiments in
> # standard hardware environments.
> # Default: 131072 (128 KB) on UNIX, 32768 (32 KB) on Windows NT.
> #-------------------------------------------------------------
> -------------
> #DISKBUFFSIZE 131072 # block size in bytes
>
>
> #-------------------------------------------------------------
> -------------
> # Specifies the block size for network I/O to Tivoli Storage Manager
> # (in bytes). The valid range is from 4 KB to 256 KB.
> # This parameter is effective only for the multi-threaded version of
> # Tivoli Data Protection for SAP R/3 with RL_COMPRESSION set to YES.
> # In all other cases this parameter will be ignored.
> # Default: 131072
> #-------------------------------------------------------------
> -------------
> #ADSMBUFFSIZE 131072 # block size in bytes
>
>
> #-------------------------------------------------------------
> -------------
> # Name of a program that is called by Tivoli Data Protection
> for SAP R/3
> # before the backup task is started.
> # Default: none.
> #-------------------------------------------------------------
> -------------
> #FRONTEND pgmname parameterlist
>
>
> #-------------------------------------------------------------
> -------------
> # Name of a program that is called by Tivoli Data Protection
> for SAP R/3
> # after the backup task is completed.
> # Default: none.
> #-------------------------------------------------------------
> -------------
> #BACKEND pgmname parameterlist
>
>
> #-------------------------------------------------------------
> -------------
> # Maximum number of data base backup versions to be kept.
> # Note: Version control by Tivoli Data Protection for SAP R/3 is only
> # activated if the SAP R/3 release is 3.0C and higher and the
> parameter
> # MAX_VERSION is not 0.
> # Default: 0.
> #-------------------------------------------------------------
> -------------
> MAX_VERSIONS 20
>
>
> #-------------------------------------------------------------
> -------------
> # Batch processing
> # Default:
> # The default for the BATCH parameter is YES for the backup
> run and NO for
> # the restore run if the BATCH parameter is COMMENTED OUT in
> this profile.
> #-------------------------------------------------------------
> -------------
> #BATCH YES # unattended
> automated operation
> #BATCH NO # manual operation
>
>
> #-------------------------------------------------------------
> -------------
> # Control of error situations
> # Default: NO.
> #-------------------------------------------------------------
> -------------
> #EXITONERROR NO # don't exit if
> an error occurs
>
>
> #-------------------------------------------------------------
> -------------
> # Control of information for reporting purposes, e.g.
> messages, statistics.
> # Default: NO (no additional data will be reported).
> #-------------------------------------------------------------
> -------------
> REPORT NO # no additional messages
> #REPORT YES # all additional messages
> #REPORT 2 # all additional
> messages + summary
>
>
> #-------------------------------------------------------------
> -------------
> # Controls generation of a trace file.
> # Note: we recommend using the trace function only in cooperation with
> # the hotline.
> # Default: NO.
> #-------------------------------------------------------------
> -------------
> #TRACE YES
>
>
> #-------------------------------------------------------------
> -------------
> # Specify the trace file for Tivoli Data Protection for SAP
> R/3 to store all
> # trace information (if TRACE ON), full path and name of file.
> # Note: for an actual trace the string '%BID' will be replaced by
> # the current backupid.
> # (.../backint_%BID.trace changes to
> .../backint_SAP___9809182300.trace).
> # Default: stdout.
> #-------------------------------------------------------------
> -------------
> #TRACEFILE /oracle/C21/dbs/backint_%BID.trace
> #TRACEFILE /oracle/C21/dbs/backint.trace
>
>
> #-------------------------------------------------------------
> -------------
> # Specify maximum size of the trace file in KB.
> # Note: if the trace information exceeds the specified limit
> it will be
> # written in wrap-around fashion.
> # Note: Currently not supported.
> # Default: 100KB.
> #-------------------------------------------------------------
> -------------
> #TRACEMAX 100
>
>
> #-------------------------------------------------------------
> -------------
> # Specify the configuration file for Tivoli Data Protection
> for SAP R/3 to
> # store all variable parameters, full path and name of the file.
> # Default: $ORACLE_HOME/dbs/init$ORACLE_SID.bki
> #-------------------------------------------------------------
> -------------
> CONFIG_FILE /oracle/SVD/dbs/initSVD.bki
>
>
> #-------------------------------------------------------------
> -------------
> # Number of retries to be performed in case of errors when
> connecting to
> # the Tivoli Storage Manager server.
> # Default: 3.
> #-------------------------------------------------------------
> -------------
> #RETRY 5
>
>
> #-------------------------------------------------------------
> -------------
> # Specify time after which a retry has to be performed (seconds).
> # Default: 1.
> #-------------------------------------------------------------
> -------------
> #TCPWAIT 1
>
>
> #-------------------------------------------------------------
> -------------
> # Number of times Tivoli Data Protection for SAP R/3 retries
> to save/restore
> # a file in case an error occurs.
> # Default: 3.
> #-------------------------------------------------------------
> -------------
> #FILE_RETRIES 3
>
>
> #-------------------------------------------------------------
> -------------
> # Shall Tivoli Data Protection for SAP R/3 send information
> to a performance
> # monitor. Define IP-address and portnumber. (see
> Administration Tools)
> # Default: none.
> #-------------------------------------------------------------
> -------------
> #PERF_MONITOR IP-address Portnr.
> #PERF_MONITOR perf_mon_server 5125
>
>
> #-------------------------------------------------------------
> -------------
> # Shall Tivoli Data Protection for SAP R/3 send error/status
> information
> # to a Tivoli Storage Manager server. The statement for
> servername must
> # match one of the servers listed in a SERVER statement.
> Statements for
> # verbosity can be ERROR, WARNING, or DETAIL.
> # Default: none.
> #-------------------------------------------------------------
> -------------
> #LOG_SERVER servername [verbosity]
> #LOG_SERVER server_a ERROR
>
>
> #-------------------------------------------------------------
> -------------
> # Shall Tivoli Data Protection for SAP R/3 send error/status
> information
> # to a network management program via SNMP traps?
> # Default: none.
> #-------------------------------------------------------------
> -------------
> #SNMPTRAP Hostname community level
>
>
> #*************************************************************
> *************
> # Statement for multiple Servers and multiple Paths.
> # may be used multiple times (one for each server).
> #*************************************************************
> *************
>
>
> SERVER pv_devt_client # Servername
> SESSIONS 1 # Max sessions
> PASSWORDREQUIRED YES # Use a password
> ADSMNODE pv_devt # Tivoli Storage Manager Nodename
> BRBACKUPMGTCLASS sapmc # Mgmt-Classes
> BRARCHIVEMGTCLASS sapmc # Mgmt-Classes
> # USE_AT 0 1 2 3 4 5 6 # Days for backup
>
>
> #SERVER server_b
> # SESSIONS 1
> # PASSWORDREQUIRED YES
> # ADSMNODE C21
> # BRBACKUPMGTCLASS mdb
> # BRARCHIVEMGTCLASS mlog1 mlog2
> # USE_AT 0 1 2 3 4 5 6
>
>
> #*************************************************************
> *************
> # USE_AT : 0=Su 1=Mo 2=Tu 3=We 4=Th 5=Fr 6=Sa
> # Default: all days
> #*************************************************************
> *************
>
>
> #-------------------------------------------------------------
> -------------
> # End of profile
>
>
> END
> root@pv_devt:/oracle/SVD/dbs]
>
|
