Also check to see if you  have any pending RESTORES.
Restores will 'lock' the data on a tape or disk in which
attempts are being made to copy or move.

... joe.f.


Joseph A Faracchio,  Systems Programmer, UC Berkeley
Private mail on any topic should be directed to :
   joef AT socrates.berkeley DOT edu

On Tue, 21 Aug 2001, PINNI, BALANAND (SBCSI) wrote:

> I feel that problem is at DB level.
> I would run audit DB also.
> Just a thought.
> -----Original Message-----
> From: Hunley, Ike [mailto:Ike.Hunley AT BCBSFL DOT COM]
> Sent: Tuesday, August 21, 2001 9:23 AM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: ADSM Monitor ...
>
>
> I have a good one .....
>
> I issue the following....
>     MOVE DATA SYS2.ADSM.STGP27 STGPOOL=BACKUPPOOL WAIT=NO
>
> RESULT..
>
> ANR2209W Volume SYS2.ADSM.STGP27 contains no data.
>
> I then issue....
>      DELETE VOLUME SYS2.ADSM.STGP31 DISCARDDATA=NO WAIT=NO
>
> RESULT..
> Volume SYS2.ADSM.STGP27 still contains data.
>
> What gives???
>
>
> Blue Cross Blue Shield of Florida, Inc., and its subsidiary and
> affiliate companies are not responsible for errors or omissions in this
> e-mail message. Any personal comments made in this e-mail do not reflect the
> views of Blue Cross Blue Shield of Florida, Inc.
>