The TSMXXXXXX.README.SRV file has the instructions to set up the LTO 
library/drives.

Yes, you should use /dev/smc0 as the library controller device.

Suad
--
On Mon, Jun 04, 2001 at 03:09:44PM -0500, Jeff Bach wrote:
On Mon, Jun 04, 2001 at 03:09:44PM -0500, Jeff Bach wrote:
> HELP
>         I need some specific help on defining a new LTO library to ADSM.  It
> is a four frame library with 14 tape drives.  I am trying to define it to
> 4.3.3 AIX and 4.1.2.0 ADSM .
>
>         The server is already connected to a 3494 library and using
> /dev/lmcp0 as the library.  Will I have  a separate device for this library?
> What libtype should it be defined as in ADSM?  I plan to use the library
> from multiple ADSM servers and ADSM application instances on this server.
> The tape drives are attached to a Brocade switch and the servers can see the
> drives.  OS devices are configured.
>
> Jeff Bach
>
>
>
>
> **********************************************************************
> This email and any files transmitted with it are confidential
> and intended solely for the individual or entity to
> whom they are addressed.  If you have received this email
> in error destroy it immediately.
> **********************************************************************