Hello,

My configuration is TSM Server 4.1.2, NT4.0 SP6, LTO 3583 with 2 tape
drives 3580 connected via Adaptec 29160. Drivers are the IBM ones in
version 1.1.7.3

Backups are running perfectly, restores are also running perfectly but
during the week-end, when reclamation is running, I get the following
error messages :

05/08/2001 16:39:04   ANR1417W Access mode for volume 265AADL1 now set
to
                       "read-only" due to excessive read error.

05/08/2001 16:39:37   ANR8302E I/O error on drive DRIVE2 (\\.\TAPE1)
(OP=LOCATE,
                       CC=0, KEY=03, ASC=14, ASCQ=00,
SENSE=70.00.03.00.00.00.-

00.1C.00.00.00.00.14.00.06.00.21.80.FF.FF.00.02.00.00.0-
                       0.00.00.00.00.19.00.01.35.A2.02.00,
Description=An
                       undetermined error has occurred).  Refer to
Appendix D in
                       the 'Messages' manual for recommended action.
05/08/2001 16:39:37   ANR8359E Media fault detected on LTO volume
265AADL1 in
                       drive DRIVE2 (\\.\TAPE1) of library LIB3583.

Any idea ?

Many thanks in advance,

 Ruddy Stouder
System Engineer
I.R.I.S.
Rue du Bosquet 10 - Parc Scientifique de Louvain-La-Neuve
B- 1435 Mont-Saint-Guibert
ruddy.stouder AT irislink DOT com
http://www.irislink.com
Tel: +32 (0)10 48 75 10  -  Fax: +32 (0)10 48 75 40