Re: DLT 8000 / TSM problem
2001-04-04 12:17:22
Hi Mike,
Are you sure you are using the TSM DLT driver and not NT/Win2K one ?
Your DLT8k firmware must be upgraded, see TSM 4.1.3 README.DEV file
It has been tested w/ v22
>>>> Drive : Quantum DLT8000 F/W : 022B
Rv
> -----Message d'origine-----
> De : Michael Hack [mailto:hackmich AT MAINSTOR DOT DE]
> Envoyé : mercredi 4 avril 2001 14:28
> À : ADSM-L AT VM.MARIST DOT EDU
> Objet : DLT 8000 / TSM problem
>
>
> Knows anyone this problem with DLT8000 and TSM 4.1.3.0 under NT?
>
> To label a tape works fine.
> When TSM try to write data on the tape a undefined write error occurs
> without any sense keys .
> With the DLT7000 drives we have no problems.
>
> Environment:
>
> NT 4.0 SP5
> TSM 4.1.3.0
>
> Drive firmware:
>
> STK DLT8000: V43 and V51
> Quantum DLT8000: V20
>
>
> Activity Log von TSM 4.1.3.0
>
> 04/04/2001 11:01:37 ANR0984I Process 2 for MIGRATION started in the
> BACKGROUND at 11:01:37.
> 04/04/2001 11:01:37 ANR1000I Migration process 2 started
> for storage pool
> DISKPOOL.
> 04/04/2001 11:01:38 ANR8326I 001: Mount DLT volume SCRTCH
> R/W in drive
> MT5.0.0.2 (MT5.0.0.2) of library DLTLIB1 within 60 minutes.
>
> 04/04/2001 11:01:42 ANR8328I 001: DLT volume BAND02 mounted in drive
> MT5.0.0.2 (MT5.0.0.2).
> 04/04/2001 11:01:42 ANR1340I Scratch volume BAND02 is now defined in
> storage pool DLTPOOL.
> 04/04/2001 11:01:42 ANR1411W Access mode for volume BAND02
> now set to
> "read-only" due to write error.
> 04/04/2001 11:01:47 ANR8360I Volume BAND02 has been deleted
> from MANUAL
> library DLTLIB1.
> 04/04/2001 11:01:47 ANR1341I Scratch volume BAND02 has been
> deleted from
> storage pool DLTPOOL.
> 04/04/2001 11:02:05 ANR8468I DLT volume BAND02 dismounted from drive
> MT5.0.0.2 (MT5.0.0.2) in library DLTLIB1.
>
> Thanks
> Michael
>
|
|
|