Hello Michael,
which drivers do you use in the systems, NT or manufacturer? And which date
do the drivers have? I would suggest to update your test system to the
latest driver version for the adapter. You can get it from
http://www.adaptec.com/worldwide/support/driverdetail.html?cat=/Product/ASC-29160&filekey=ultra160_fms_v112.exe
If that doesn't help you should try to update the drive firmware.
I haven't used DLT8000 with v4.1.3.0 but with 3.7.4.x (and it works).
Mit freundlichen Grüßen,
Met vriendelijke groeten,
With best regards,
Bien amicalement,
CU/2,
Dirk Billerbeck
Dirk Billerbeck
GE CompuNet Kiel
Enterprise Computing Solutions
Am Jaegersberg 20, 24161 Altenholz (Kiel), Germany
Phone: +49 (0) 431 / 3609 - 117, Fax: +49 (0) 431 / 3609 - 190,
Internet: dirk.billerbeck @ gecits-eu.com
This email is confidential. If you are not the intended recipient,
you must not disclose or use the information contained in it.
If you have received this mail in error, please tell us
immediately by return email and delete the document.
hackmich AT MAINSTOR DOT [email protected] on 04.04.2001 14:50:04
Please respond to ADSM-L AT VM.MARIST DOT EDU
Sent by: ADSM-L AT VM.MARIST DOT EDU
To: mailbox.dekelnsm
cc:
Subject: Re: DLT 8000 / TSM problem
--------------------------------------------------------------------------
Hello Dirk,
Hello Dirk,
at customer side there is an Compaq server.
But I test it with an Siemens server and a Adaptec 29160 controller and I
had the same problem.
Hello Jack,
we use original Quantum IV tapes.
Has anybody installed DLT8000 drives with TSM 4.1.3.0 under NT and the
system works?
Thanks.
Michael
Von: Dirk Billerbeck <dirk.billerbeck AT GECITS-EU DOT COM>
Am: 04.04.2001 12:36 GMT
Bitte antworten an "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
An: ADSM-L AT VM.MARIST DOT EDU
Kopie: (Blindkopie: Michael Hack/MAINSTOR/Niedernberg/mus/DE)
Thema: Re: DLT 8000 / TSM problem
Hello,
is this a Compaq server?
I know there are problems with the standard NT SCSI adapter drivers and
DLT8000 drives. We observed this problems especially with Compaq servers
when the Compaq SCSI Controller drivers from the SSD was NOT used. The
standard NT SCSI drivers seem to have problems to communicate with DLT8000
drives, DLT4000 and DLT7000 worked fine though.
Mit freundlichen Grüßen,
Met vriendelijke groeten,
With best regards,
Bien amicalement,
CU/2,
Dirk Billerbeck
Dirk Billerbeck
GE CompuNet Kiel
Enterprise Computing Solutions
Am Jaegersberg 20, 24161 Altenholz (Kiel), Germany
Phone: +49 (0) 431 / 3609 - 117, Fax: +49 (0) 431 / 3609 - 190,
Internet: dirk.billerbeck @ gecits-eu.com
This email is confidential. If you are not the intended recipient,
you must not disclose or use the information contained in it.
If you have received this mail in error, please tell us
immediately by return email and delete the document.
hackmich AT MAINSTOR DOT [email protected] on 04.04.2001 13:27:51
Please respond to ADSM-L AT VM.MARIST DOT EDU
Sent by: ADSM-L AT VM.MARIST DOT EDU
To: mailbox.dekelnsm
cc:
Subject: DLT 8000 / TSM problem
--------------------------------------------------------------------------
Knows anyone this problem with DLT8000 and TSM 4.1.3.0 under NT?
Knows anyone this problem with DLT8000 and TSM 4.1.3.0 under NT?
To label a tape works fine.
When TSM try to write data on the tape a undefined write error occurs
without any sense keys .
With the DLT7000 drives we have no problems.
Environment:
NT 4.0 SP5
TSM 4.1.3.0
Drive firmware:
STK DLT8000: V43 and V51
Quantum DLT8000: V20
Activity Log von TSM 4.1.3.0
04/04/2001 11:01:37 ANR0984I Process 2 for MIGRATION started in the
BACKGROUND at 11:01:37.
04/04/2001 11:01:37 ANR1000I Migration process 2 started for storage pool
DISKPOOL.
04/04/2001 11:01:38 ANR8326I 001: Mount DLT volume SCRTCH R/W in drive
MT5.0.0.2 (MT5.0.0.2) of library DLTLIB1 within 60 minutes.
04/04/2001 11:01:42 ANR8328I 001: DLT volume BAND02 mounted in drive
MT5.0.0.2 (MT5.0.0.2).
04/04/2001 11:01:42 ANR1340I Scratch volume BAND02 is now defined in
storage pool DLTPOOL.
04/04/2001 11:01:42 ANR1411W Access mode for volume BAND02 now set to
"read-only" due to write error.
04/04/2001 11:01:47 ANR8360I Volume BAND02 has been deleted from MANUAL
library DLTLIB1.
04/04/2001 11:01:47 ANR1341I Scratch volume BAND02 has been deleted from
storage pool DLTPOOL.
04/04/2001 11:02:05 ANR8468I DLT volume BAND02 dismounted from drive
MT5.0.0.2 (MT5.0.0.2) in library DLTLIB1.
Thanks
Michael
|
