Bill,

You need to create the TSM device before you can access the drive from
TSM.  See the docs for how to define the drive from smitty, devices, TSM
devices, etc.

Steffan

At 02:58 PM 3/22/2001 -0500, you wrote:

        We are currently using our only 3575 as our ADSM data base backup.
I would like to move that to our 8 mm drive so I entered:

  define drive 3575lib eightmm device=/dev/rmt0

Just as show in the book, but an error comes back and says I need to add the
element.  So I tried this:

 define drive 3575lib eightmm device=/dev/rmt0 element=10-60-00-5,0

and since I'm here,  it didn't like that either.  What is the proper format?

Thanks
Bill Dias
AIX Systems Administrator
Gerber Scientific.