Re: What's wrong here
2001-03-21 16:03:15
Here is what I got.
tsm: TSM>q devclass class8mm f=d
Device Class Name: CLASS8MM
Device Access Strategy: Sequential
Storage Pool Count: 1
Device Type: 8MM
Format: 8900
Est/Max Capacity (MB): 5,120.0
Mount Limit: DRIVES
Mount Wait (min): 60
Mount Retention (min): 10
Label Prefix: ADSM
Library: LIB8MM
Directory:
Server Name:
Retry Period:
Retry Interval:
Last Update by (administrator): ADMIN
Last Update Date/Time: 03/20/01 16:34:14
tsm: TSM>backup db devclass=class8mm type=full
ANR2280I Full database backup started as process 9.
ANS8003I Process number 9 started.
tsm: TSM>q proc
ANR0944E QUERY PROCESS: No active processes found.
ANS8001I Return code 11.
tsm: TSM>q actlog begint=now-0:01
Date/Time Message
--------------------
----------------------------------------------------------
----------------------------------------------------------
03/21/01 12:58:46 ANR2017I Administrator ADMIN issued command: BACKUP DB
03/21/01 12:58:46 ANR2017I Administrator ADMIN issued command: BACKUP DB
devclass=class8mm type=full
03/21/01 12:58:46 ANR0984I Process 9 for DATABASE BACKUP started in the
BACKGROUND at 12:58:46.
03/21/01 12:58:46 ANR2280I Full database backup started as process 9.
03/21/01 12:58:46 ANR8447E No drives are currently available in library
LIB8MM.
03/21/01 12:58:46 ANR1404W Scratch volume mount request denied - mount
failed.
03/21/01 12:58:46 ANR4578E Database backup/restore terminated - required
volume was not mounted.
03/21/01 12:58:46 ANR0985I Process 9 for DATABASE BACKUP running in the
BACKGROUND completed with completion state FAILURE at
12:58:46.
03/21/01 12:58:48 ANR2017I Administrator ADMIN issued command: QUERY
PROCESS
03/21/01 12:58:48 ANR0944E QUERY PROCESS: No active processes found.
03/21/01 12:58:48 ANR2017I Administrator ADMIN issued command: ROLLBACK
It seems like it doesn't find the drive however if I ran
tsm: TSM>q drive
Library Name Drive Name Device Type Device ON LINE
------------ ------------ ----------- ----------------
-------------------
-------------------
LIB8MM DRV8MM 8MM /dev/mt0 Yes
LIB8MM DRV8MM 8MM /dev/mt0 Yes
it shows that the drive is there. Am at loss again.
Arshad.
From: "Prather, Wanda" <Wanda.Prather AT JHUAPL DOT EDU>
Reply-To: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: What's wrong here
Date: Wed, 21 Mar 2001 14:54:19 -0500
The tape should be labelled, but not checked in.
Also check your DEVCLASS (q devclass class8mm f=d), make sure the
MOUNTLIMIT
is set to 1 or DRIVES.
Then take the tape OUT of the drive so TSM will see the drive is free.
Then issue your BACKUP DB command.
TSM will put a message in the ACTLOG (or the console, if you have one open)
telling you when to mount a scratch tape.
THEN put the tape in the drive.
-----Original Message-----
From: Arshad Sheikh [mailto:amshaik70 AT HOTMAIL DOT COM]
Sent: Wednesday, March 21, 2001 2:31 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: What's wrong here
Thanks for the reply.
But since its just a 8mm 5GB tape drive and not a library so I think I
can't
have any scratch volume, here is what I have got when I try to label a tape
tsm: TSM>label libvolume lib8mm tape01 checkin=scratch overwrite=yes
ANR8494E LABEL LIBVOLUME: An option specified is not valid for MANUAL
libraries.
ANS8001I Return code 3.
okay next I tried the same command without checkin=scratch statment and it
worked.
tsm: TSM>label libvolume lib8mm tape01 overwrite=yes
ANS8003I Process number 8 started.
tsm: TSM>q proc
Process Process Description Status
Number
-------- --------------------
------------------------------------------------
8 LABEL LIBVOLUME ANR8804I Labelling volume TAPE01 in library
LIB8MM.
tsm: TSM>q actlog begint=now-0:01
Date/Time Message
--------------------
---------------------------------------------------------
03/21/01 11:29:16 ANR8372I 002: Remove 8MM volume TAPE01 from drive
DRV8MM
(/dev/mt0) of library LIB8MM.
03/21/01 11:29:16 ANR8800I LABEL LIBVOLUME for volume TAPE01 in library
LIB8MM completed successfully.
03/21/01 11:29:16 ANR0985I Process 8 for LABEL LIBVOLUME running in the
BACKGROUND completed with completion state SUCCESS
at
11:29:16.
Its a single tape drive attached to the system. How can I define scratch
volume for it. In stgpool I put maxscratch parameter as 10.
Arshad
>From: George Lesho <glesho AT AFCE DOT COM>
>Reply-To: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
>To: ADSM-L AT VM.MARIST DOT EDU
>Subject: Re: What's wrong here
>Date: Wed, 21 Mar 2001 13:06:11 -0600
>
>Arshad, It would seem that there are not scratch volumes available for
use
>as a
>db backup tape. Try the following select at your dsmadmc prompt to
>identify how
>many scratch tapes are in your library:
>
>select count(*) as num_scratch_tapes from libvolumes where
status='Scratch'
>
>George Lesho
>Storage/System Admin
>AFC Enterprises
>
>
>
>
>
>Arshad Sheikh <amshaik70 AT HOTMAIL DOT COM> on 03/21/2001 11:32:14 AM
>
>Please respond to "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
>
>To: ADSM-L AT VM.MARIST DOT EDU
>cc: (bcc: George Lesho/Partners/AFC)
>Fax to:
>Subject: What's wrong here
>
>
>
>Hi there,
>
>I am a newbie so forgive my naiveness. I want to setup TSM 3.7 on a box
>with
>8mm drive, so I create a library, drive,devclass,stgpool and label my
>volume. I also created the domain,policyset,mgmtclass and copypool for
>backing up files and register the node in it.
>Now when I tried to do a db backup
>
>backup db devclass=c8mm type=full
>
>I got the following from actlog
>
>03/21/01 09:10:51 ANR2017I Administrator ADMIN issued command: BACKUP
DB
> devclass=class8mm type=full
>03/21/01 09:10:51 ANR0984I Process 6 for DATABASE BACKUP started in
the
> BACKGROUND at 09:10:51.
>03/21/01 09:10:51 ANR2280I Full database backup started as process 6.
>03/21/01 09:10:51 ANR8447E No drives are currently available in
library
> LIB8MM.
>03/21/01 09:10:51 ANR1404W Scratch volume mount request denied - mount
> failed.
>03/21/01 09:10:51 ANR4578E Database backup/restore terminated -
required
> volume was not mounted.
>03/21/01 09:10:51 ANR0985I Process 6 for DATABASE BACKUP running in
the
> BACKGROUND completed with completion state FAILURE
>at
> 09:10:51.
>
>
>What I need to do to make it work, I already labeled the volume, its
>already
>inserted in the drive. What is wrong here?? Checkin volume command only
>works with automated libraries so I can't check in the volume.
>
>Any help is deeply appreciated.
>
>Arshad.
>_________________________________________________________________
>Get your FREE download of MSN Explorer at http://explorer.msn.com
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- What's wrong here, Arshad Sheikh
- Re: What's wrong here, George Lesho
- Re: What's wrong here, Arshad Sheikh
- Re: What's wrong here, Shekhar Dhotre
- Re: What's wrong here, Prather, Wanda
- Re: What's wrong here,
Arshad Sheikh <=
- Re: What's wrong here, Arshad Sheikh
- Re: What's wrong here, Prather, Wanda
- Re: What's wrong here, Salman Ghani
- Re: What's wrong here, Arshad Sheikh
- Re: What's wrong here, Prather, Wanda
- Re: What's wrong here, Malbrough, Demetrius
- Re: What's wrong here, Rich Taft
- Re: What's wrong here, Arshad Sheikh
|
|
|