ADSM-L

Re: Server to Server

2001-02-09 14:51:06
Subject: Re: Server to Server
From: Walter Ridderhof <Walter.Ridderhof AT MAIL.ING DOT NL>
Date: Fri, 9 Feb 2001 14:12:47 +0000
The things to watch for in a server-2-server configuration involving diskpools
is too make sure the receiving diskpool can buffer the archive (!
server-2-server data uses a defined archive copy group !) sent over by the
source server, the parameter to watch is the 'max cap' for the device class
defined for server-2-server. Also make sure the sources node name defined in the
server definition (as in q server f=d) has a maxnummp setting of at least 2,
this is crucial if archiving direct to tape. As a closer don't forget to set max
scratch on the receiving sequential storage pool, and for the WAN(ners) if
possible set client compression on, this helps reducing the amount of client
data pushed thru the WAN.


regards Walter Ridderhof


-----------------------------------------------------------------
ATTENTION:
ATTENTION:
The information in this electronic mail message is private and
confidential, and only intended for the addressee. Should you
receive this message by mistake, you are hereby notified that
any disclosure, reproduction, distribution or use of this
message is strictly prohibited. Please inform the sender by
reply transmission and delete the message without copying or
opening it.

Messages and attachments are scanned for all viruses known.
If this message contains password-protected attachments, the
files have NOT been scanned for viruses by the ING mail domain.
Always scan attachments before opening them.
-----------------------------------------------------------------
=========================================================================
<Prev in Thread] Current Thread [Next in Thread>