Hi all, we have 2 3570B12 Magstar units each has 2 drives, (each unit are
on separate scsi's but same address). I currently have 2 libraries defined
in ADSM each with 1 unit in each. I want to  be able to have 1 library with
all 4 drives in it but don't know if this is possible because the element
numbers for both unit's are 16 & 17. Has anyone been able to configure more
than 2 3570 drives in a library ?
 We have TSM 3.7.2 & AIX 4.3.2.0

  Thanks
  Doug McLauchlan
  Woolworths (NZ) Ltd
  email dougm AT woolworths.co DOT nz
DISCLAIMER: "The information in this email and in any attachments is 
confidential and intended solely for the attention and use of the addressee(s). 
If this email is not intended for you, you must not use, read, distribute or 
copy it. If you have received this email by mistake please call the sender 
immediately on 64-9-2620772 and erase the email and any attachments, and any 
copies of the same. Internet communications are not secure and therefore 
Woolworths (NZ) Ltd does not accept legal responsibility for the contents of 
this message. Any views or opinions expressed are solely those of the author 
and do not necessarily represent those of Woolworths (NZ) Ltd unless 
specifically stated."