Hi *sm and LINUX-Fans,
I found it. The Code for TSM-Client for LINUX S/390 is located on
ftp://service.boulder.ibm.com/storage/tivoli-storage-management/maintenance/client/v4r1/Linux/v412/390/
and can be downloaded from there.
We installed it twice, one time into an Image with SUSE 7.0, it was without
problems.
Second we installed it on RedHat 7.0 and got following situation. The
software requires C++-Libraries  /lib/libstdc++-libc6.1-2.so.3 and
/lib/libstdc++-libc6.1-2.a.3. You can see this with the command ldd dsm.
Do now the followins symbolic link:
 ln ?s /lib/libstdc++-libc6.2-2.so.3 /lib/libstdc++-libc6.1-2.so.3
 ln ?s /lib/libstdc++-libc6.2-2.a.3 /lib/libstdc++-libc6.1-2.a.3
  After you have done this, pleas refresh the link with ldconfig.
  Now it works fine.

  Good luck.

      Gerd Becker

      EMPRISE NETWORK Consulting GmbH
      Albstr. 14
      70597 Stuttgart

      Tel.: 0711/990083-0 oder Mobil: 0172/4036581
      Fax: 0711/990083-9
      mailto:gerd.becker AT emprise DOT de
      mailto:scc AT s390 DOT de

      http://www.emprise.de
      http://www.s390.de
----- Weitergeleitet von Gerd Becker/Emprise am 12.01.01 09:52 -----
                                                                                
                                                                                
                          
                    Gerd Becker                                                 
                                   
                                         An:     ADSM-L AT VM.MARIST DOT EDU    
                                          
                    07.01.01             Kopie:                                 
                                   
                    18:48                Thema:  LINUX Client for S/390         
                                   
                                                                                
                                   
                                                                                
                                   



Hi *Sm and LINUX-Fans,
Tivoli announced, that the LINUX for S/390 Client will be available on the
Ftp-Server at 29.12.2000. I checked this and I could'nt find the code. Does
anyone knows, where it is? I have LINUX for test running on an S/390 LPAR
and would save my data.

Mit freundlichen Grüßen / best regards

Gerd Becker

EMPRISE NETWORK Consulting GmbH
Albstr. 14
70597 Stuttgart

Tel.: 0711/990083-0 oder Mobil: 0172/4036581
Fax: 0711/990083-9
mailto:gerd.becker AT emprise DOT de
mailto:scc AT s390 DOT de

http://www.emprise.de
http://www.s390.de