Hello Ruddy,

1- After installing the Ultrium device driver available from the ftp site:
   ftp://service.boulder.ibm.com/storage/devdrvr/WinNT/
2- You should go under Tape Devices and press ESC on the first panel.
3- Then select the Drivers tab and add your library.
4- Select the 3583 library and click on OK.
5- Press Yes to use the existing files.

You may need a reboot after step 1 and 5.

Regards,

Vo An Nguyen
Email: vanguyen AT ca.ibm DOT com



Ruddy STOUDER <Ruddy.Stouder AT IRISLINK DOT COM>@VM.MARIST.EDU> on 12/28/2000
09:12:54

Please respond to "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>

Sent by:  "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>


To:   ADSM-L AT VM.MARIST DOT EDU
cc:
Subject:  LTO libraries under NT4.0


I saw many mails concerning problems with LTO libraries under NT. I

> May be could you help me ? I have a 3583 library with 2  *  3580
> drives - They are all detected by the SCSI card but if I follow the
> documented procedure
> to install the drivers, I only see the drives under "Tape devices". Do
> you know why and how I should configure the Library.
>
>
> Many thanks in advance,
>  Ruddy Stouder
> System Engineer
> I.R.I.S.
> Rue du Bosquet 10 - Parc Scientifique de Louvain-La-Neuve
> B- 1435 Mont-Saint-Guibert
> ruddy.stouder AT irislink DOT com
> http://www.irislink.com
> Tel: +32 (0)10 48 75 10  -  Fax: +32 (0)10 48 75 40
>