My quick and dirty approach to the tape checkin issue --
1) mark all tapes in the old library (back home) as 'unavailable'. I do this
by storage pool - "upd vol * acce=unav wherestg=aix-cart" (I have 10 storage
pools I do this for).
2) mark all off-site tapes as read-only. "upd vol * acce=reado whereacce=of"
We currently run a 'manual' library at D/R, so this is all that is required.
If you have a true automated library, follow up with a 'checkin libv
<library> search=yes stat=pri checklabel=barcode". And then, after the
assorted restores are going, worry about setting up scratch tapes, admin
schedules, and such like (I tend to blow away all schedules as soon as I get
ADSM up, and then add them back in when I'm ready for them).
Tom Kauffman
NIBCO, Inc.
> -----Original Message-----
> From: Shekhar Dhotre [mailto:shekhar.dhotre.b AT bayer DOT com]
> Sent: Friday, December 22, 2000 10:13 AM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Disaster Recovery
>
>
> Hi all ,
> Completed Disaster Recovery Test successfully at Sungurad
> Philadelphia
> yesterday.
> i was going through following steps , and encountered some
> problems ,
> I restored TSM database and log
> updated all tapepool volumes as destroyed ,
>
> loaded all copypool volumes in STk9710 , after this when i
> started restoring
> oracle database
> in actlog TSM was asking to checkin volumes A1234 . this
> process was so
> time consuming ,
> if one has 100 copypool tapes , do they need to checkin first
> ? can`t TSM
> checkin them as private ?
> even if i am using DRM module , lot of steps i was doing
> manually , DRM scripts
> only helps you to
> 1 format log and DB volumes , restore database , register license ,
> but did not update any volumes as destroyed .. neither checkin process
> Anyhow i started at 8.00 .AM and finished by 3:00 AM ..
> was using 10 DLT
> drives
> in STK9710 . out of 2 gone bad after sometime : -)
> Thanks to Chris Wikham , as her tips were useful , like STK
> Library Microcode
> ver .
> Hotline phone Nos. (Without this ACSLS was not working ).
> thanks everybody who provided inputs for the same.
> Also passed the Tivoli Cert Test on 14 OF December .
>
>
> Shekhar Dhotre
> IBM certified AIX specialists
> IBM certified RS/6000 SP Admin .
> Microsoft Certified Systems Engg.
> Tivoli Certified Consultant 4.1 ( 14 December 2000)
> shekhar.dhotre.b AT bayer DOT com
>
> 508-359-3872
>
> "Winner never quits, Quitter never wins "
>
|