Re: cannot read barcode in slot #90
2000-12-14 14:40:37
It depends on your library. If you are using an IBM tape library you probably
have one of several utilities such as "tapeutil" or another. These utilities
can access the library and give you an inventory separately from what *SM says.
Also if you have a chart of the slots in your library and have viewing ports,
then then just use a flashlight and look through to find them. Otherwise you
have to interrupt things and open library to find out.
David B. Longo
Systems Administrator
Health First, Inc. I/T
3300 Fiske Blvd.
Rockledge, FL 32955-4305
PH 321.434.5536
Pager 321.634.8230
Fax: 321.434.5525
david.longo AT health-first DOT org
>>> como AT BNL DOT GOV 12/14/00 01:57PM >>>
Hi,
Received about 10 messages
"cannot read barcode in slot #90" and
9 other tape slots.
Does anyone know how to determine
what tape is in slot number 90.
Seems "q libvol" only lists the tapes
that it know about.
Andy
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- cannot read barcode in slot #90, Como, Andrew T
- Re: cannot read barcode in slot #90,
David Longo <=
- Re: cannot read barcode in slot #90, David Longo
- Re: cannot read barcode in slot #90, Como, Andrew T
- Re: cannot read barcode in slot #90, Cheryl Wiseley
- Re: cannot read barcode in slot #90, Cheryl Wiseley
- Re: cannot read barcode in slot #90, Richard Sims
- Re: cannot read barcode in slot #90, sekar n
- cannot read barcode in slot #90, ADSM : Dist Stor Manager [mailto:ADSM-L
- cannot read barcode in slot #90, Como , Andrew T [mailto:como
|
|
|