ADSM-L

Re: emulex LP8000 HBA

2000-12-13 04:29:42
Subject: Re: emulex LP8000 HBA
From: Suad Musovich <suad AT CCU1.AUCKLAND.AC DOT NZ>
Date: Wed, 13 Dec 2000 22:30:09 +1300
How can you tell whether it's a LP8000 (short of ripping off the lid)?

Cheers, Suad
--
On Wed, Dec 13, 2000 at 12:25:17AM -0800, Joel Fuhrman wrote:
On Wed, Dec 13, 2000 at 12:25:17AM -0800, Joel Fuhrman wrote:
> I'm trying to configure a new H80 AIX 4.3.3 host with TSM 4.1.1 using an
> Emulex LP8000 host bus adapter connected to an STK 9840 fibre channel disk
> drive.  Per the installation instructions in the Quick Start Guidem I loaded
> the fibre channel pre-req's for the fcrte fileset; but they seem to be for
> the Emulex LP7000 card.  Config manager, cfgmgr, wants the level 8 drivers
> which I don't believe IBM released.  So I loaded the drivers from Emulex.
> Cfgmgr will configure the devices; but "smit tsm_devices" fails to list or
> find any fiber channel devices.
>
> If you have a working config using the Emulex LP8000 would you mind sharing
> how you set it up?
<Prev in Thread] Current Thread [Next in Thread>