V4.1.1.0 Library Sharing
2000-11-29 09:28:46
I recently installed TSM V4.1.1.0 for AIX and was looking at the library
sharing feature. The documentation was a little sketchy and it talked
about san sharing of a 3494 over a scsi connection. The information about
the 3494 was in the README.SRV file, not in the Administrator's
Guide. From what I was reading the feature is suppose to allow you to
share the tape drives in a 3494 between two ADSM servers. If a drive is
allocated to one server the second server would allocate a different drive
if one is available and wait if one is not. So if I wanted to, I could
have two adsm servers and they could share a 3494 ATL with 6 3590 drives,
all 6 drives would be allocated to both ADSM servers and the servers could
figure out which drives to use. I would use a different set of tapes for
each ADSM server with different scratch and private categories. Am I
interpreting the documentation correctly?
Jim Sporer
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- V4.1.1.0 Library Sharing,
Jim Sporer <=
|
|
|