ADSM-L
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: Upgrade

2000-11-17 13:31:09
Subject: Re: Upgrade
From: James Thompson <mezron AT HOTMAIL DOT COM>
Date: Fri, 17 Nov 2000 11:30:40 MST 
The odm definitions changed from 3.7.2 to 3.7.3 and above.
Instead of showing up as tape they are now defined adsmtape.

You should remove the old mtX definitions with the command
  rmdev -dR mtX
Do this for each mtX device.  Then redefine them through smitty.

Once you do you should see them from running the command
lsdev -Cc adsmtape

Regards,
James Thompson




From: Shekhar Dhotre <Shekhar.Dhotre.B AT BAYER DOT COM>
Reply-To: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: Upgrade
Date: Fri, 17 Nov 2000 12:44:23 -0500

Hi  rebooted the  AIX box , now rmt1 and rmt2 are available and mt0 and mt1
defined ,
how to make them available ? tried adding throgh smit -Tivoli storage
manager
-tape
gives following error.

Command: failed        stdout: yes           stderr: no

Before command completion, additional instructions may appear below.

Method error (/etc/methods/cfgadsmdd):
        0514-047 Cannot access a device.
cfgadsmdd[get_i]: ioctl SCIO(L)INQU first call failed, retry if possible,
errno
= 19
cfgadsmdd[get_i]: SCIO(L)INQU failed w/ unretriable errno=19.
cfgadsmdd[inq..]: free dds.
cfgadsmdd[main ]: error inquiry or building dds,rc=47



medrs2:lsdev -Cc tape
lsdev: 0514-521 Cannot find information in the predefined device
        configuration database for the customized device mt0.
lsdev: 0514-521 Cannot find information in the predefined device
        configuration database for the customized device mt1.
rmt0 Available 10-60-00-5,0 SCSI 4mm Tape Drive
mt0  Defined   20-60-00-3,0 N/A
mt1  Defined   20-60-00-4,0 N/A
rmt1 Available 20-60-00-3,0 Other SCSI Tape Drive
rmt2 Available 20-60-00-4,0 Other SCSI Tape Drive




"DDA.RFC-822=ADSM-L AT VM.MARIST DOT EDU/P=Internet/A= /C=us" on 11/17/2000
11:50:29 AM
Please respond to "DDA.RFC-822=ADSM-L AT VM.MARIST DOT EDU/P=Internet/A= /C=us" 
@
X400
To: "DDA.RFC-822=ADSM-L AT VM.MARIST DOT EDU/P=Internet/A= /C=us"@X400
cc:

Subject: Re: Upgrade

        I'm not sure if your cut and paste is truncating, but see   mt0
and mt1      it is not prefixed with 'r'....
        step 1).  maybe rmdev -dl mt0   and    rmdev -dl mt1
        followed by a cfgmgr
        may do it?
        I'll assume that the lsdev -Cc tape indicated device names of
rmt0,
mt0 and mt1....
        maybe go ahead and rmdev -dl rmt0 too on step 1....
        FYI Thanks Tim




        Shekhar Dhotre <Shekhar.Dhotre.B AT BAYER DOT COM>
        11/17/2000 10:37 AM
        Please respond to "ADSM: Dist Stor Manager"
<ADSM-L AT VM.MARIST DOT EDU>@SMTP@Exchange
        To:     ADSM-L AT VM.MARIST DOT EDU@SMTP@Exchange
        cc:

        Subject:        Re: Upgrade

         The problem is with rmt1 and rmt2 drives , they are not available
to system
        (AIX) , but mt0 , and mt1 are ..
          So i amtrying to remove rmt1 and rmt2  , but  unable to do so
...
notching my
        hairs  ....
        medrs2:lsdev -Cc tape
        lsdev: 0514-521 Cannot find information in the predefined device

              configuration database for the customized device mt0.

        lsdev: 0514-521 Cannot find information in the predefined device
                configuration database for the customized device mt1.


        rmt0 Available 10-60-00-5,0 SCSI 4mm Tape Drive
        mt0  Available 20-60-00-3,0 N/A
        mt1  Available 20-60-00-4,0 N/A
        medrs2:rmdev -dl mt0
        rmdev: 0514-521 Cannot find information in the predefined device
                configuration database for the customized device mt0.

        medrs2:rmdev -dl mt1
        rmdev: 0514-521 Cannot find information in the predefined device
                configuration database for the customized device mt1.

        medrs2:odmdelete -q name=rmt1 -o CuAt
        0518-307 odmdelete: 0 objects deleted.

        medrs2:set -o vi

        medrs2:odmdelete -q name=rmt1 -o CuDv
        0518-307 odmdelete: 0 objects deleted.
        medrs2:odmdelete -q value3=rmt1 -o CuDvDr
        0518-307 odmdelete: 0 objects deleted.


        medrs2:cfgmgr
        cfgmgr: 0514-612 Unable to configure the mt0 device because
                it either does not exist in the customized device database
or it does no
        t
                have a corresponding entry in the predefined device
database.
        cfgmgr: 0514-612 Unable to configure the mt1 device because
                it either does not exist in the customized device database
or it does no
        t
                have a corresponding entry in the predefined device
database.

        medrs2:id
        uid=0(root) gid=0(system)
groups=2(bin),3(sys),7(security),8(cron),10(audit)
        medrs2:odmget CuAt | grep mt0
                name = "rmt0"
                name = "rmt0"
                name = "rmt0"
                name = "rmt0"
                name = "rmt0"
                name = "rmt0"
                name = "rmt0"
                name = "rmt0"
                name = "rmt0"
                name = "rmt0"
                name = "rmt0"

        medrs2:errpt
        IDENTIFIER TIMESTAMP  T C RESOURCE_NAME  DESCRIPTION
        5DFED6F1   1116153600 I O SYSPFS         UNABLE TO ALLOCATE SPACE
IN
FILE SYSTEM
        369D049B   1112150900 I O SYSPFS         UNABLE TO ALLOCATE SPACE
IN
FILE SYSTEM



        shekhar ..







        "DDA.RFC-822=ADSM-L AT VM.MARIST DOT EDU/P=Internet/A= /C=us" on
11/17/2000
10:04:44 AM
        Please respond to "DDA.RFC-822=ADSM-L AT VM.MARIST DOT EDU/P=Internet/A=
/C=us" @ X400
        To: "DDA.RFC-822=ADSM-L AT VM.MARIST DOT EDU/P=Internet/A= /C=us"@X400
        cc:

        Subject: Re: Upgrade

        THose messages come from a communications problem somewhere
between
TSM,
        ssi, and ACSLS.

        *       Make sure that ACSLS is up and you can talk with it via
cmd_proc.

        *       Then make sure that the ssi and mini-el tasks are up.
Make
sure
        they can talk with ACSLS by running lbtest.

        *       If they are OK, then stop and restart TSM.

        *       If you still get those errors, call support.



        > -----Original Message-----
        > From: Joshua S. Bassi [SMTP:jbassi AT IHWY DOT COM]
        > Sent: Thursday, November 16, 2000 5:39 PM
        > To:   ADSM-L AT VM.MARIST DOT EDU
        > Subject:      Re: Upgrade
        >
        >
        >
        > TSM server started but getting following error ..
        >
        > ANR0916I TIVOLI STORAGE MANAGER distributed by Tivoli is now
ready
for
        > use.
        > TSM:TSM>
        >
        > 11-16-00 17:14:32 none[0]:
        > cl_ipc_write: Sending message to socket 50004 failed on "Error
0"
        > 11-16-00 17:14:52 none[0]:
        > cl_inform: Sending message to socket 50004 failed on "Error 0"
        > 11-16-00 17:15:02 none[0]:
        > acs_ipc_write: FATAL_ERROR! cl_ipc_write() failed.
        >
        >
        > 11-16-00 17:15:12 none[0]:
        > acs_ipc_write: FATAL_ERROR! cl_ipc_write() failed.
        >
        >
        >
        >
        >
        > "DDA.RFC-822=ADSM-L AT VM.MARIST DOT EDU/P=Internet/A= /C=us" on
11/16/2000
        > 05:18:27 PM
        > Please respond to
"DDA.RFC-822=ADSM-L AT VM.MARIST DOT EDU/P=Internet/A=
/C=us" @
        > X400
        > To: "DDA.RFC-822=ADSM-L AT VM.MARIST DOT EDU/P=Internet/A= /C=us"@X400
        > cc:
        >
        > Subject: Re: Upgrade
        >
        > Issue# dsmserv upgradedb
        >
        >
        > --
        > Joshua S. Bassi
        > IBM Certified- AIX Support, HACMP, SAN
        > Enterprise Disk(Shark)& Tape Solutions
        > Tivoli Certified Consultant - ADSM/TSM
        > jbassi AT ihwy DOT com
        >
        > -----Original Message-----
        > From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU]On
Behalf Of
        > Shekhar Dhotre
        > Sent: Thursday, November 16, 2000 2:00 PM
        > To: ADSM-L AT VM.MARIST DOT EDU
        > Subject: Upgrade
        >
        >
        > Hi all i just applied patch for Tivoli Storage manager .
        > to upgrade from 3.7.2 to 3.7.4  , and tried to restart the
server
        > gives following error.  where and how i should use  UPGRADEDB
command?
        >
        > # dsmserv
        > ANR7800I DSMSERV generated at 09:50:09 on Oct 17 2000.
        >
        > Tivoli Storage Manager for AIX-RS/6000
        > Version 3, Release 7, Level 4.0
        >
        > Licensed Materials - Property of IBM
        >
        > 5697-TSM (C) Copyright IBM Corporation 1999. All rights
reserved.
        > U.S. Government Users Restricted Rights - Use, duplication or
disclosure
        > restricted by GSA ADP Schedule Contract with IBM Corporation.
        >
        > ANR0900I Processing options file dsmserv.opt.
        > ANR0990I Server restart-recovery in progress.
        > ANR0200I Recovery log assigned capacity is 1100 megabytes.
        > ANR0201I Database assigned capacity is 500 megabytes.
        > ANR0306I Recovery log volume mount in progress.
        > ANR0983W The server database was recorded by a down-level
version
of the
        > server
        > program. The UPGRADEDB parameter is required to start the server
and
        > automatically upgrade the database contents to the current
server
version.
        > Please refer to installation instructions for precautionary
backup
        > procedures
        > prior to doing this.


_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.

Share information about yourself, create your own public profile at
http://profiles.msn.com.
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: Upgrade, Joshua S. Bassi
Next by Date:  Re: Upgrade, Shekhar Dhotre
Previous by Thread:  Re: Upgrade, Andy Hynes
Next by Thread:  Re: Upgrade, Shekhar Dhotre
Indexes:  [Date] [Thread] [Top] [All Lists]