ADSM-L
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: Changing configuration to use 4 drives

2000-09-27 06:15:34
Subject: Re: Changing configuration to use 4 drives
From: Ken Chamberlain <ken.chamberlain AT UTORONTO DOT CA>
Date: Wed, 27 Sep 2000 06:14:17 -0400 
OK, I tried changing devclass 3590 to format=DRIVE and mountlimit=DRIVES
but I'm still getting "no drives".
I think if tapes are mounted but idle they aren't being dismounted to supply
the requested backup operation.  This is especially true if the less than 4
tapes are mounted and idle and the backup operation has been configured to
use all drives.
If I manually dismount all tapes prior to the backup operation all is OK.
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: Oggetto: Re: Select ??????????, Pieter Groen
Next by Date:  Re: Changing configuration to use 4 drives, Andy Hynes
Previous by Thread:  Re: Changing configuration to use 4 drives, Matthew Glanville
Next by Thread:  Re: Changing configuration to use 4 drives, Andy Hynes
Indexes:  [Date] [Thread] [Top] [All Lists]