Re: TSM Upgrade
2000-09-21 13:11:28
In the tradition of ADSM, I would avoid the first release; we waited until
373 for the first TSM, now I recommend the 4.1.1 level, BUT only if you need
a new feature only found in 4.1.
We've been running 373 with 372.01 clients on Win2K servers for the past 6
weeks, on two separate environments. Did a 3rd server install on Win2k-Pro,
all went (mostly) smoothly. The NT-device config for Dell-120T needed help
setting the element number, but that was the only "glitch" we've seen, so
far; the Dell-130T device-config was correct at the outset. Also, we've
installed 2 AIX servers with 373, one has 30 Solaris 372 clients and 5 NT
clients... all environments are installed and running okay. (Minor hang-ups
due to inadequate handling of Win2K System Objects, we're planning to use
NT-Backup to achieve "incremental" versions for restore, as in the old NT
days!)
Hope this helps.
Don France
Technical Architect, P.A.C.E.
San Jose, CA
mailto:dfrance AT pacbell DOT net
PACE - http://www.pacepros.com
Bus-Ph: (408) 257-3037
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- TSM Upgrade, Remeta, Mark
- Re: TSM Upgrade, Susi, Scott T
- Re: TSM Upgrade, Remeta, Mark
- Re: TSM Upgrade, Susi, Scott T
- Re: TSM Upgrade,
France, Don G (Pace) <=
- Re: TSM Upgrade, Remeta, Mark
- TSM Upgrade, Remeta , Mark [mailto:MRemeta
- Re: TSM Upgrade, Susi , Scott T [mailto:STSusi
- Re: TSM Upgrade, Remeta , Mark [mailto:MRemeta
- TSM Upgrade, Remeta , Mark [mailto:MRemeta
- Re: TSM Upgrade, Pace
|
|
|