Hi There,

     I keep getting SCSI Adapter failure errors on our new SAN. The environment 
is TSM 3.7.3.7 on Solaris 2.6, Emulex 7000E HBA, Brocade 2400 Switch, ADC 250R 
Router (really Crossroads), Scalar 1000 library (4 modules) and AIT-2 tape 
drives.

     Has anyone had similiar issues? Do people get I/O errros on SAN 
frequently, occasionally, hard ever, none at all?

     Any advice welcome.

     Also, be interested in hearing from anyone running TSM 3.7 on Solaris in a 
SAN environment. Please responds, I'm on a tight deadline here.

From activity log:-

08/13/2000 13:53:02  ANR8302E I/O error on drive DRIVE12 (/dev/rmt/12mt)
                      (OP=READ, CC=205, KEY=FF, ASC=FF, ASCQ=FF,
                      SENSE=**NONE**, Description=SCSI adapter failure).  Refer
                      to Appendix B in the 'Messages' manual for recommended
                      action.
08/13/2000 13:53:02  ANR8302E I/O error on drive DRIVE11 (/dev/rmt/11mt)
                      (OP=WRITE, CC=205, KEY=FF, ASC=FF, ASCQ=FF,
                      SENSE=**NONE**, Description=SCSI adapter failure).  Refer
                      to Appendix B in the 'Messages' manual for recommended
                      action.


Regards

--
Andrew Webster
Andrew Webster
PC, NetApp Filer, TSM
Sanno Move Project
Deutsche Real Estate Consulting Ltd. - Tokyo
Internal (but outside Tokyo): 88 408-7542
Tel. +81-3-5156-7542
Fax. +81-3--5156-4811
Mobile: 0907 184 8958

Andrew-M.Webster AT db DOT com