ADSM-L

[no subject]

2015-10-04 17:29:34
dwight,

   it was defined with collocation = yes,
   i will set it to no

tim


"Cook, Dwight E" wrote:

> Well, in a "def stg xxxx po=co" the default collocation is "no" but it kinda
> sounds like you might be seeing collocation=yes in your copy pool...
> how many nodes in the primary pool ?
> I take it there are no anr????e messages around the time of the backup stg
> I'm also guessing the tapes are still "readw" and are still libvols, and
> show "filling"...
> have you tried a "move data oneofthosevolsinthecopypool stg=vru_copy" to see
> if it puts it on another tape or tacks it on the end of one of the other
> already used, filling volumes.
>
> just some guesses
> Dwight
>
> > ----------
> > From:         Tim Brown[SMTP:tbrown AT CENHUD DOT COM]
> > Reply To:     ADSM: Dist Stor Manager
> > Sent:         Thursday, July 27, 2000 12:34 PM
> > To:   ADSM-L AT VM.MARIST DOT EDU
> > Subject:      storage pool copy tapes not being filled
> >
> > <<File: tbrown.vcf>>
> >
> > have had a problem with a copy storage pool.
> >
> > the devtype  info is:
> >
> >    Device Type: 3590
> >    Unit Name: 3590-1
> >    Maximum Capacity (MB):
> >    Estimated Capacity (MB): 9,216.0
> >
> > i have recently created a new storage pool called vru_tape with a copy
> > storage pool of vru_copy
> >
> > the first storage pool tape volume took about 24% of the volume
> >
> > i performed the initial copy of the storage pool "backup stg vru_tape
> > vru_copy"
> >
> > the ending result in the vru_copy storage pool was 3 storage volumes
> >
> > vol1 4.6% used
> > vol2 9.4% used
> > vol3 10.0% used
> >
> > am i missing something, but shouldn't these 3 volumes be only on 1
> > volume
> > i have deleted and recreated the storage pool volumes and primary and
> > copy storage pools but
> > the copy storage pool still goes to multiple tapes the 1st time.. other
> > copy storage pools that
> > i have do not act this way, i have reviewed everything that i can find
> > and can not figure out the problem...
> >
> > tim brown
> >

<Prev in Thread] Current Thread [Next in Thread>
  • [no subject], Unknown <=