Re: DLT 7000 Quantum Setup Question
2000-07-02 11:58:15
Thank you, John.
So after this I would define to Tape pools with 13 tapes each. Can I
then drag the pools above a disk pool using the GUI? I think then it
should make a copy on both diskpools? Does then a BACKUP DB for example
create a backup on both tape pools?
And my last question: how can I restore data if a tape in one tape pool
is corrupted and ADSM should read data from the mirrored tape?
Thanks for help,
Regards
Werner Nussbaumer
"Price, John" wrote:
>
> Werner,
>
> If you have 2 libraries defined then you have to use the label library
> command for each library.
> label libv lb0.0.0.0 search=yes labels=barcode checkin=scratch
> label libv lb0.0.0.1 search=yes labels=barcode checkin=scratch
> This is if you have all the tapes in the library now and are not checking
> them in through the mailslot.
>
> > ----------
> > From: Werner Nussbaumer[SMTP:w.nussbaumer AT DATACOMM DOT CH]
> > Reply To: ADSM: Dist Stor Manager
> > Sent: Friday, June 30, 2000 1:28 AM
> > To: ADSM-L AT VM.MARIST DOT EDU
> > Subject: DLT 7000 Quantum Setup Question
> >
> > I have the following configuration:
> >
> > IBM 4500 with TWO Quantum DLT 7000 libraries (ATL Powerstor L500 with 13
> > Tapes, one cleaning tape and 3 Drives each).
> >
> > First I tested a "BACKUP DB" with one tape in the library. This worked
> > fine the first time:
> >
> > ***********************************************************************
> > 06/28/2000 14:32:21 ANR2017I Administrator TSMADMIN issued command:
> > BACKUP DB
> > devclass=dltclass1
> > type=full
> > 06/28/2000 14:32:21 ANR0984I Process 2 for DATABASE BACKUP started in
> > the
> > BACKGROUND at
> > 14:32:21.
> > 06/28/2000 14:32:21 ANR2280I Full database backup started as process
> > 2.
> > 06/28/2000 14:32:21 ANR0609I BACKUP DB started as process
> > 2.
> > 06/28/2000 14:33:23 ANR8337I DLT volume TAPE1 mounted in drive
> > MT1.0.0.1
> >
> > (MT1.0.0.1).
> > 06/28/2000 14:33:23 ANR1360I Output volume TAPE1 opened (sequence
> > number 1).
> > 06/28/2000 14:33:32 ANR4554I Backed up 448 of 3612 database
> > pages.
> > 06/28/2000 14:33:33 ANR4554I Backed up 896 of 3612 database
> > pages.
> > 06/28/2000 14:33:35 ANR4554I Backed up 1344 of 3612 database
> > pages.
> > 06/28/2000 14:33:36 ANR4554I Backed up 1792 of 3612 database
> > pages.
> > 06/28/2000 14:33:37 ANR4554I Backed up 2240 of 3612 database
> > pages.
> > 06/28/2000 14:33:39 ANR4554I Backed up 2688 of 3612 database
> > pages.
> > 06/28/2000 14:33:40 ANR4554I Backed up 3136 of 3612 database
> > pages.
> > 06/28/2000 14:33:46 ANR0407I Session 754 started for administrator
> > TSMADMIN
> > (WebBrowser) (HTTP
> > 10.3.169.62(2687)).
> > 06/28/2000 14:33:47 ANR0405I Session 754 ended for administrator
> > TSMADMIN
> >
> > (WebBrowser).
> > 06/28/2000 14:33:52 ANR4554I Backed up 3584 of 3612 database
> > pages.
> > 06/28/2000 14:33:56 ANR1361I Output volume TAPE1
> > closed.
> > 06/28/2000 14:33:57 ANR2017I Administrator TSMADMIN issued command:
> > QUERY
> > ACTLOG BEGINDATE=06/28/2000
> > BEGINTIME=NOW-1:00
> > ENDDATE=06/28/2000 ENDTIME=NOW
> > ORIGINATOR=ALL
> > 06/28/2000 14:34:00 ANR4550I Full database backup (process 2)
> > complete, 3612
> > pages
> > copied.
> > 06/28/2000 14:34:00 ANR0985I Process 2 for DATABASE BACKUP running in
> > the
> > BACKGROUND completed with completion state
> > SUCCESS at
> >
> > 14:34:00.
> > 06/28/2000 14:34:09 ANR8336I Verifying label of DLT volume TAPE1 in
> > drive
> > MT1.0.0.1
> > (MT1.0.0.1).
> > 06/28/2000 14:34:45 ANR8468I DLT volume TAPE1 dismounted from drive
> > MT1.0.0.1
> > (MT1.0.0.1) in library
> > LB0.0.0.1.
> > ***********************************************************************
> >
> > But the second time I got:
> >
> > ***********************************************************************
> > 06/28/2000 14:52:53 ANR2017I Administrator TSMADMIN issued command:
> > BACKUP DB
> > devclass=dltclass1
> > type=full
> > 06/28/2000 14:52:53 ANR0984I Process 9 for DATABASE BACKUP started in
> > the
> > BACKGROUND at
> > 14:52:53.
> > 06/28/2000 14:52:53 ANR2280I Full database backup started as process
> > 9.
> > 06/28/2000 14:52:53 ANR0609I BACKUP DB started as process
> > 9.
> > 06/28/2000 14:52:53 ANR0405I Session 803 ended for administrator
> > TSMADMIN
> >
> > (WebBrowser).
> > 06/28/2000 14:52:53 ANR1405W Scratch volume mount request denied - no
> > scratch
> > volume
> > available.
> > 06/28/2000 14:53:22 ANR2017I Administrator TSMADMIN issued command:
> > QUERY
> > ACTLOG BEGINDATE=06/28/2000
> > BEGINTIME=NOW-1:00
> > ENDDATE=06/28/2000 ENDTIME=NOW
> > ORIGINATOR=ALL
> > 06/28/2000 14:53:23 ANR4578E Database backup/restore terminated -
> > required
> > volume was not
> > mounted.
> > 06/28/2000 14:53:23 ANR0985I Process 9 for DATABASE BACKUP running in
> > the
> > BACKGROUND completed with completion state
> > FAILURE at
> >
> > 14:53:23.
> > ***********************************************************************
> >
> > So my question is:
> >
> > What do I have to do to set up a scratch volume pool on both libraries
> > and mirror the tape backup on both of them. Is there a description for
> > such an environment beginning from tape labelling, checkin of the tapes,
> > defining scratch for 13 times 2 tapes with mirroring and tape cleaning?
> > Anf also I should know how I can set ADSM to automatically switch from a
> > defect tape at restore to the mirrored copy.
> >
> > Any help and documentation is appreciated!
> >
> > Thank you very much,
> > Regards
> > Werner Nussbaumer
> >
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- Re: DLT 7000 Quantum Setup Question,
Werner Nussbaumer <=
|
|
|