Server: TSM V3.7 on Windows NT 4.0.
Device: 3570 library with one drive.
I have set the reclamation percentage to 40% for the TAPE storage pool. There 
are several volumes  belonging to this stgpool with a status of 'full' and an 
Utilization Percentage of 40, 50, 60, 80 where the reclamation process should 
be running but it si not.
I have move the reclamation percentage with no results.
I have run the 'q stg TAPE f=d' and found that nothing was set for the  
'reclaimstg' parameter. I have defined a new sequential acces storage pool 
(RECLAIM) and set it as the 'reclaimstg' for the TAPE storage pool. As I did 
this the reclamation prcess started, the server prompted for a volume that was 
already checked in to the library then the process ended with a status of 
'FAILURE' with the following message:

ANR1082W. Space reclamation terminated for volume XXXX - insufficient number of 
mount points available for removable media.

Any suggestion to solve this??

Thanks in advance.
Regards

Gerardo Zapata Gonzalez
Tivoli Proffessional Services/TSM
IBM de Mixico
(52 5) 270 5740