ADSM init problem with STK9710
2015-10-04 17:35:06
To All,
Has anyone had issues with getting ADSM to properly sync to a
STK9710 using 9840 drives. ADSM will come up on restart but the library will
not come back with a "ready for operations". I have run lbtest to make sure
that the library can talk and it moves without issues. I run option 15 to
perform an ioctl Xinquiry and it comes back with the following error below.
I have 2 STK9710's attached to this system and ADSM will talk to the one ATL
and not the other. I recreated the AIX and ADSM devices as well and this
did not help the issue either. Thanks
Device driver identification = 3.1.2.41
Incompatible driver level, expected: 3.1.2.30
INQUIRY data:
devtype 8 rmb 80
flags 2 flags2 2
additional_length 33 reserved 0 reserved2 0 flags3 0
vendor id: STK
product id: 9710
product revision level: 1100
vendor specific:
20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
( )
device_serial: PRC02223076
device world-wide-id: 0000000000000000
analyze rc 0 err 0 (Successful,Error 0)
cc 0 (Successful) resid 0 data 0
Total elapsed time in seconds = 0.00
|
|
|