Re: ADSM init problem with STK9710
2000-01-26 00:22:03
What is the ADSM level and STK 9710 microcode level of the library that will
not come up properly? STK 9710 microcode level 1.10.1 adds the following:
Addition of 10 byte serial number to Read Element Status Data Transfer
Element response.
Look at APAR IC24458
************************************************************************
* IC24458 ILLEGAL REQUEST DURING READ ELEMENT STATUS AFTER STK 9710 *
* FIRMWARE UPGRADE *
************************************************************************
Additional data were returned from the Read Element Status command,
causes incompatible storage allocation between the new firmware and
the current ADSM device driver. The fix resolves the differences
for 9710, 9714 and 9740 firmware upgrades.
The ADSM maintenance level must include this fix if microcode 1.10.1. is
installed.
Thanks,
Bernie Survoy
MVS Systems Engineer
216.615.9324 phone
216.621.5920 fax
StorageTek
INFORMATION made POWERFUL
|
|
|