To All,

        Has anyone had issues with getting ADSM to properly sync to a
STK9710 using 9840 drives. ADSM will come up on restart but the library will
not come back with a "ready for operations".  I have run lbtest to make sure
that the library can talk and it moves without issues. I run option 15 to
perform an ioctl Xinquiry and it comes back with the following error below.
I have 2 STK9710's attached to this system and ADSM will talk to the one ATL
and not the other.  I recreated the AIX and ADSM devices as well and this
did not help the issue either.   Thanks

Device driver identification = 3.1.2.41
  Incompatible driver level, expected: 3.1.2.30
INQUIRY data:
  devtype             8 rmb        80
  flags               2 flags2      2
  additional_length  33 reserved    0 reserved2   0 flags3   0
  vendor id:               STK
  product id:              9710
  product revision level: 1100
  vendor specific:
     20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
     (                    )
  device_serial:        PRC02223076
  device world-wide-id: 0000000000000000
analyze rc 0  err 0 (Successful,Error 0)
    cc 0 (Successful) resid 0 data 0
Total elapsed time in seconds =     0.00