I have 75 DLT tapes - which has been used in ARCserve 6.6 - and I would very
much like to reuse these tapes.

The following scenario happens both if we have made a "long erased" in
ARCserve and if not.

Check-in=====
21-01-2000 11:21:10 ANR2017I Administrator ADMIN issued command: CHECKIN
LIBVOLUME LB6.0.0.1 STATUS=SCRATCH CHECKLABEL=BARCODE SWAP=YES MOUNTWAIT=60
SEARCH=YES 21-01-2000 11:21:10 ANR0984I Process 4 for CHECKIN LIBVOLUME
started in the BACKGROUND at 11:21:10.
21-01-2000 11:21:10 ANR8422I CHECKIN LIBVOLUME: Operation for library
LB6.0.0.1 started as process 4.
21-01-2000 11:21:10 ANR0609I CHECKIN LIBVOLUME started as process 4.
21-01-2000 11:24:16 ANR8430I Volume A0057 has been checked into library
LB6.0.0.1.
21-01-2000 11:24:16 ANR8431I CHECKIN LIBVOLUME process completed for library
LB6.0.0.1; 1 volume(s) found.
21-01-2000 11:24:16 ANR0985I Process 4 for CHECKIN LIBVOLUME running in the
BACKGROUND completed with completion state SUCCESS at 11:24:16. 
=====

use tape ====
21-01-2000 11:35:35 ANR8355E I/O error reading label for volume A0057 in
drive MT4.0.0.1 (MT4.0.0.1).
21-01-2000 11:36:13 ANR8778W Scratch volume A0057 changed to Private Status
to prevent re-access. 
21-01-2000 11:36:13 ANR1405W Scratch volume mount request denied - no
scratch volume available. 
=====

Installation:
NT 4.0 SP5
TSM 3.7.1
IBM Netfinity 5500
3447 DLT library

Tnx in advance.


Med venlig hilsen / Kind regards
Birger Ulbrink
Netværksadministrator / Network administration
 
METRO Engroslager K.S. 
IT afdelingen /  IT department
Ejby Industrivej 111
DK 2600 Glostrup

Tel      +45 43467700
Tel      +45 43467819 (direct)
Fax     +45 43467822
Email   Birger.Ulbrink AT metro DOT dk <mailto:Birger.Ulbrink AT metro DOT dk>