On Thu, Nov 18, 1999 at 03:02:23PM -0500, Rodrigo Gazzaneo wrote:
> Hi,
>
> Are volumes checked in correctly ? Q VOL shows all of
> them ?
Q VOL not, since it shows only the used volumes. I can't get them used.
But Q LIBV shows them, as it was in my first append.
>
> When you first labeled them, did you do checkin=scratch ?
They are in the library. They are in Scratch state.
>
> Are the labels phisically written to the first tracks
> of the tape ? I had problems when I labeled 3590 volumes
> in a 3494 and put labelsource=barcode, so the label
> wasn4t phisically written on the tape.
This libarary got no barcode reader. I labeled the cartriges manually from
OP01 to OP20. See below.
>
> What is DEVICE TYPE=WORM ? What kind of media the
> 3995 use ? DLT ? 3570 ?
Optical. See below.
>
> regards,
> Rodrigo
>
>
> > > Update stgpool and set Maxscratch to a higher value,
> > > so it will use the scratch volumes.
> > >
> >Rodrigo,
> >the maxscratch is set to 20, and there are 20 cartiges in the library.
> >No cartrige is in private state.
> >
> > > >Hello,
> > > >after installing a 3995 C20 I was able to label and check in volumes
> >into
> > > >it,
> > > >but when i try to run an archive to it i get this error :
> > > >
> > > >ANR1405W Scratch volume mount request denied - no scratch volume
> >available.
> > > >ANR0522W Transaction failed for session 4 for node FOXSRV1 (AIX) - no
> >space
> > > >available in storage pool 3995POOL and all successor pools.
> > > >
> > > >Tho, I can see scratch volumes in the library:
> > > >3995LIB         OPT01          Scratch(Optical)                  11
> > > >3995LIB         OPT02          Scratch(Optical)                  12
> > > >etc.
> > > >
> > > >My setup is:
> > > >STGPOOL:
> > > >            Storage Pool Name: 3995POOL
> > > >            Storage Pool Type: Primary
> > > >            Device Class Name: 3995
> > > >  Maximum Scratch Volumes Allowed: 20
> > > >                           Access: Read/Write
> > > >
> > > >DEVICE CLASS:
> > > >              Device Class Name: 3995
> > > >         Device Access Strategy: Sequential
> > > >             Storage Pool Count: 1
> > > >                    Device Type: WORM
> > > >                        Format: DRIVE
> > > >         Est/Max Capacity (MB): 0.0
> > > >                   Mount Limit: DRIVES
> > > >            Mount Wait (min): 60
> > > >        Mount Retention (min): 60
> > > >                 Label Prefix:
> > > >                      Library: 3995LIB
> > > >
> > > >LIBRARY:
> > > >                 Library Name: 3995LIB
> > > >                 Library Type: SCSI
> > > >                       Device: /dev/lb1
> > > >
> > > >DRIVE:
> > > >3995LIB       DRIVE0        OPTICAL      /dev/rop0         Yes
> > > >
> > > >Any help is appreciated.
> >
> >                                                         bx
> >                                         bx AT mail.datatrans DOT hu