ADSM-L

Re: 3995 problem

1999-11-18 15:02:23
Subject: Re: 3995 problem
From: Rodrigo Gazzaneo <rodrigo_gazzaneo AT HOTMAIL DOT COM>
Date: Thu, 18 Nov 1999 15:02:23 EST
Hi,

Sorry. This was a "standard" problem, already happened
to me and is quite common on the list. I didn4t take
the correct time to investigate your data.

Are volumes checked in correctly ? Q VOL shows all of
them ?

When you first labeled them, did you do checkin=scratch ?

Are the labels phisically written to the first tracks
of the tape ? I had problems when I labeled 3590 volumes
in a 3494 and put labelsource=barcode, so the label
wasn4t phisically written on the tape.

What is DEVICE TYPE=WORM ? What kind of media the
3995 use ? DLT ? 3570 ?

regards,
Rodrigo


> Update stgpool and set Maxscratch to a higher value,
> so it will use the scratch volumes.
>
Rodrigo,
the maxscratch is set to 20, and there are 20 cartiges in the library.
No cartrige is in private state.

> >Hello,
> >after installing a 3995 C20 I was able to label and check in volumes
into
> >it,
> >but when i try to run an archive to it i get this error :
> >
> >ANR1405W Scratch volume mount request denied - no scratch volume
available.
> >ANR0522W Transaction failed for session 4 for node FOXSRV1 (AIX) - no
space
> >available in storage pool 3995POOL and all successor pools.
> >
> >Tho, I can see scratch volumes in the library:
> >3995LIB         OPT01          Scratch(Optical)                  11
> >3995LIB         OPT02          Scratch(Optical)                  12
> >etc.
> >
> >My setup is:
> >STGPOOL:
> >            Storage Pool Name: 3995POOL
> >            Storage Pool Type: Primary
> >            Device Class Name: 3995
> >  Maximum Scratch Volumes Allowed: 20
> >                           Access: Read/Write
> >
> >DEVICE CLASS:
> >              Device Class Name: 3995
> >         Device Access Strategy: Sequential
> >             Storage Pool Count: 1
> >                    Device Type: WORM
> >                        Format: DRIVE
> >         Est/Max Capacity (MB): 0.0
> >                   Mount Limit: DRIVES
> >            Mount Wait (min): 60
> >        Mount Retention (min): 60
> >                 Label Prefix:
> >                      Library: 3995LIB
> >
> >LIBRARY:
> >                 Library Name: 3995LIB
> >                 Library Type: SCSI
> >                       Device: /dev/lb1
> >
> >DRIVE:
> >3995LIB       DRIVE0        OPTICAL      /dev/rop0         Yes
> >
> >Any help is appreciated.

                                                        bx
                                        bx AT mail.datatrans DOT hu

______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
<Prev in Thread] Current Thread [Next in Thread>