> ADSM guru's
>
> Could someone explain me the real network data throughput (without
> compression) of the a ADSM connection?
>
> e.g.
> 18-10-1999 23:01:42   ANE4966I (Session: 327, Node: RIJSAP90)  Network
data
>
>                        transfer rate:        34,935.96 KB/sec
>
> Please observe :
>
> Our server is connected with a 100 Mb/s (Mega bit) connection. This is 100
> Mb per sec!
> Now since there are 8 bits in a Byte this means that the transfer rate of
> the link is 100/8 = 12.5 MB/s (Byte)
> Or  12,800.00 KByte (The multiplying factor for network data is 1024
instead
> of 1000, but the link is based on 1000 so there are a few minor errors in
> the computations.)
>
> Now let's compare this theoretical maximum to reality shall we.
>
> Theoretical maximum             12,800.00 KB/sec         43.9 GB/Hour
> Practical reality                        10,000.00 KB/sec        34.3
> GB/Hour
> in our example                  34,935.96 KB/sec        119.9 GB/Hour
>
> As you can see, the  values greatly exceed the theoretical maximum.
> How is this possible?
> or do we misinterpreted "Network data transfer rate: 34,935.96 KB/sec" ?
>
> thanks in advance
>
>
> =======================================================
>              Ruud van Ruler
> Shell Services International BV - TSEA-332
> Our Data Storage Management home page: http://sww2.shell.com/dstorage/
> > Room 2A/D07
> > Dokter van Zeelandstraat 1, 2285 BD Leidschendam NL
> Tel : 070 - 3034644  /  Fax : 070 - 3034012
> Email Internet: ruud.r.vanruler AT is.shell DOT com
>                           r_van_ruler AT compuserve DOT com
> Email X400:/S=vanRuler /I=R /C=GB /A=GOLD /P=Shell /O=IS
>
>
>                                                             R.vanRuler
> ================================================================
>