ADSM-L

ADSM on Solaris with AIT2

2015-10-04 17:40:33
Subject: ADSM on Solaris with AIT2
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU]On Behalf Of
To: ADSM-L AT VM.MARIST DOT EDU
Hello,

We have problems with configure AIT2 library to work with ADSM on
Solaris.(ADSM v3.1.2.30)
We are trying to add the drive to the system, using the 'add_drv'
command. We success doing it for the library but we failed to attach the

drives. We got the following error from :

" The driver has been successfully added to the system, but failed to
attach"

We were able to define a 4mm tape to the system without a problem.
We did it both on Sol2.5.1 and Sol 2.6
Attached more details.
# uname -a
SunOS adsm 5.5.1 Generic_103640-24 sun4m sparc SUNW,SPARCstation-20
SunOS adsm 5.6 Generic_103640-24 sun4m sparc SUNW,SPARCstation-20


# add_drv -m '* 0666 bin bin' /usr/kernel/drv/lb
# ls -l /dev/rmt/*2lb
lrwxrwxrwx   1 root     other         75 Aug 30 15:11 /dev/rmt/2lb ->
../../devices/iommu@f,e0000000/sbus@f,e0001000/SUNW,fas@3,8800000/lb@0,0:lb

# tail -7 /usr/kernel/drv/mt.conf
#
        name="mt" class="scsi"
                target=1 lun=0;
        name="mt" class="scsi"
                target=2 lun=0;
        name="mt" class="scsi"
                target=4 lun=0;

#  target=1 and target=2 AIT2 TAPE
#  target=4 4MM TAPE


# add_drv -m '* 0666 bin bin' /usr/kernel/drv/mt
# ls -l /dev/rmt/*mt
lrwxrwxrwx   1 root     other         85 Aug 30 15:14 /dev/rmt/4mt ->
../../devices/iommu@f,e0000000/sbus@f,e0001000/espdma@f,400000/esp@f,800000/
mt@4,0:mt

Any clue ???

--
Regards
Regards

Malkit Hayun , UDI
Storage Products Manager
IBM Certified Specialist-ADSM
Office: 972-3-9233440
Fax:    972-3-9233441
Mobile: 972-52-834575
Email: malkit AT udi.co DOT il
<Prev in Thread] Current Thread [Next in Thread>