Hello,

We have problems with configure AIT2 library to work with ADSM on
Solaris.(ADSM v3.1.2.30)
We are trying to add the drive to the system, using the 'add_drv'
command. We success doing it for the library but we failed to attach the

drives. We got the following error from :

" The driver has been successfully added to the system, but failed to
attach"

We were able to define a 4mm tape to the system without a problem.
We did it both on Sol2.5.1 and Sol 2.6
Attached more details.
# uname -a
SunOS adsm 5.5.1 Generic_103640-24 sun4m sparc SUNW,SPARCstation-20
SunOS adsm 5.6 Generic_103640-24 sun4m sparc SUNW,SPARCstation-20


# add_drv -m '* 0666 bin bin' /usr/kernel/drv/lb
# ls -l /dev/rmt/*2lb
lrwxrwxrwx   1 root     other         75 Aug 30 15:11 /dev/rmt/2lb ->
../../devices/iommu@f,e0000000/sbus@f,e0001000/SUNW,fas@3,8800000/lb@0,0:lb

# tail -7 /usr/kernel/drv/mt.conf
#
        name="mt" class="scsi"
                target=1 lun=0;
        name="mt" class="scsi"
                target=2 lun=0;
        name="mt" class="scsi"
                target=4 lun=0;

#  target=1 and target=2 AIT2 TAPE
#  target=4 4MM TAPE


# add_drv -m '* 0666 bin bin' /usr/kernel/drv/mt
# ls -l /dev/rmt/*mt
lrwxrwxrwx   1 root     other         85 Aug 30 15:14 /dev/rmt/4mt ->
../../devices/iommu@f,e0000000/sbus@f,e0001000/espdma@f,400000/esp@f,800000/mt@4,0:mt

Any clue ???

--
Regards
Regards

Malkit Hayun , UDI
Storage Products Manager
IBM Certified Specialist-ADSM
Office: 972-3-9233440
Fax:    972-3-9233441
Mobile: 972-52-834575
Email: malkit AT udi.co DOT il