You may need to configure the LM to allow access from your server. In
some (all?) installations, the Library Manager will only accept commands
from specified IP's. Make sure that your server's address is in that list.
You can set the list by going to the Library Manager screen, going to:
Commands Menu
LAN Options
Add LAN Host
Good luck!
-
Best regards,
Best regards,
Brian
+-----------------------------------------------------------------------+
| Brian T. Huntley Systems and Network Engineer |
| Campus Information Services, Clarkson University |
| Ph/FAX: 315.268-2292/6570 |
| bth AT clarkson DOT edu www.clarkson.edu/cis |
+-----------------------------------------------------------------------+
UNIX *is* user friendly. It's just selective about who its friends are.
PGP Public Key available. finger bth AT clarkson DOT edu
On Thu, 19 Aug 1999, Alexandre Bicas Caldeira wrote:
// Bill,
//
// I'm pretty sure that the solution you sent me worked with you, but again my
ADSM
//
// crashed.
//
// There's one point that I couldn't understand: How does ADSM emulates SCSI
// through a LAN connection.
//
// This library has two tape drives connected through SCSI (ADMS detects them
very
// easily) , but the Library itself (robot) is connected through LAN ! I know
that
// ADSM looks for the file C:\winnt\ibmatl.conf, but there must be something
// missing ... but I
// don't know what ...
//
// If you have any documentation about the installation process or any other
tip,
// please do send me; I'll be very glad !
//
// Thank you !
//
// Alexandre Bicas Caldeira
// -----------------------------------------------------
// SERVICE IT Solutions - http://www.service.com.br
// Rua Helena, 280 cj. 1106 - Sco Paulo - SP
// Fone/Fax: 011-30401960
//
//
//
//
//
//
// Bill Smoldt wrote:
//
// > Alexandre,
// >
// > Yes, I configured a beta site with WindowsNT V3.1.2.20 and a 3494. It
works
// > great.
// >
// > You need to disable the IBM Library Autochanger service and let
adsmscsi.sys
// > do the library management, just as you would a tape drive. You will have
to
// > reboot after disabling that service.
// >
// > If you still have trouble inside ADSM, try using lbtest in the utils
// > directory to troubleshoot your library configuration. The directions are
in
// > the back of the IBM SCSI Tape Installation and Users Guide.
// >
// > Bill Smoldt SSSI
// > Storage Solutions Specialists, Inc.
// > www.storsol.com
// > smoldt AT storsol DOT com
// >
// > -----Original Message-----
// > From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On
Behalf Of
// > Alexandre Bicas Caldeira
// > Sent: Wednesday, August 18, 1999 8:04 AM
// > To: ADSM-L AT VM.MARIST DOT EDU
// > Subject: Help on IBM 3494 Library
// >
// > ADSM'ers,
// >
// > I4ve been having some problems trying to define a library IBM 3494
// > under Windows NT with ADSM 3.1.2.30.
// > This library is connected through LAN.
// > I4ve already modified the file ibmatl.conf, and its last line is
// > " 3494LM library_ip host_alias "
// > The library service "IBM Library Autochanger" (???) is running.
// >
// > My main problem is :
// > When I try to define the 3494 library with the command "DEF
// > LIBRARY TYPE=349X DEVICE=3494LM", I receive a system error. It4s the
// > same error whether is the service runnig or not.
// >
// > I4ve tried the same thing with ADSM 3.1.2.0 and the system crashed.
// > Probably it4s an external error, once ADSM passes all its library
// > requests to the service "IBM Library Autochanger" (I4ve noticed this
// > because the service log grows up each time i try to acces the library
// > through ADSM)
// >
// > Has anyone succefully configured this kind of library ? Any kind of
// > help would be very appreciated !
// >
// > Thanks
// >
// > Alexandre Bicas Caldeira
// > -----------------------------------------------------
// > SERVICE IT Solutions - http://www.service.com.br
// > Rua Helena, 280 cj. 1106 - Sco Paulo - SP
// > Fone/Fax: 011-30401960
//
// --
//
|
