Re: Help on IBM 3494 Library
1999-08-19 09:07:30
Bill,
I'm pretty sure that the solution you sent me worked with you, but again my ADSM
crashed.
There's one point that I couldn't understand: How does ADSM emulates SCSI
through a LAN connection.
This library has two tape drives connected through SCSI (ADMS detects them very
easily) , but the Library itself (robot) is connected through LAN ! I know that
ADSM looks for the file C:\winnt\ibmatl.conf, but there must be something
missing ... but I
don't know what ...
If you have any documentation about the installation process or any other tip,
please do send me; I'll be very glad !
Thank you !
Alexandre Bicas Caldeira
-----------------------------------------------------
SERVICE IT Solutions - http://www.service.com.br
SERVICE IT Solutions - http://www.service.com.br
Rua Helena, 280 cj. 1106 - Sco Paulo - SP
Fone/Fax: 011-30401960
Bill Smoldt wrote:
> Alexandre,
>
> Yes, I configured a beta site with WindowsNT V3.1.2.20 and a 3494. It works
> great.
>
> You need to disable the IBM Library Autochanger service and let adsmscsi.sys
> do the library management, just as you would a tape drive. You will have to
> reboot after disabling that service.
>
> If you still have trouble inside ADSM, try using lbtest in the utils
> directory to troubleshoot your library configuration. The directions are in
> the back of the IBM SCSI Tape Installation and Users Guide.
>
> Bill Smoldt SSSI
> Storage Solutions Specialists, Inc.
> www.storsol.com
> smoldt AT storsol DOT com
>
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On
> Behalf Of
> Alexandre Bicas Caldeira
> Sent: Wednesday, August 18, 1999 8:04 AM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Help on IBM 3494 Library
>
> ADSM'ers,
>
> I4ve been having some problems trying to define a library IBM 3494
> under Windows NT with ADSM 3.1.2.30.
> This library is connected through LAN.
> I4ve already modified the file ibmatl.conf, and its last line is
> " 3494LM library_ip host_alias "
> The library service "IBM Library Autochanger" (???) is running.
>
> My main problem is :
> When I try to define the 3494 library with the command "DEF
> LIBRARY TYPE=349X DEVICE=3494LM", I receive a system error. It4s the
> same error whether is the service runnig or not.
>
> I4ve tried the same thing with ADSM 3.1.2.0 and the system crashed.
> Probably it4s an external error, once ADSM passes all its library
> requests to the service "IBM Library Autochanger" (I4ve noticed this
> because the service log grows up each time i try to acces the library
> through ADSM)
>
> Has anyone succefully configured this kind of library ? Any kind of
> help would be very appreciated !
>
> Thanks
>
> Alexandre Bicas Caldeira
> -----------------------------------------------------
> SERVICE IT Solutions - http://www.service.com.br
> Rua Helena, 280 cj. 1106 - Sco Paulo - SP
> Fone/Fax: 011-30401960
--
=========================================================================
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- Help on IBM 3494 Library, Alexandre Bicas Caldeira
- Re: Help on IBM 3494 Library, Matt Mattingly
- Re: Help on IBM 3494 Library, Bill Smoldt
- Re: Help on IBM 3494 Library, Alexandre Bicas Caldeira
- Re: Help on IBM 3494 Library,
Alexandre Bicas Caldeira <=
- Re: Help on IBM 3494 Library, Richard Sims
- Re: Help on IBM 3494 Library, Brian T. Huntley
- Re: Help on IBM 3494 Library, Purdon, James
- Re: Help on IBM 3494 Library, Bill Smoldt
- Help on IBM 3494 Library, ADSM : Dist Stor Manager [mailto:ADSM-L
- Re: Help on IBM 3494 Library, ADSM : Dist Stor Manager [mailto:ADSM-L
|
|
|