I actually went through each of those steps yesterday to no avail. We
(myself and the IBM tech who was trying to help me) even went so far as to
change the httpport number and try it that way. Still no luck. Thanks for
the suggestion, though.
Barry
Barry J. Patterson, CNE All views expressed are my own and not
Mellon Bank, NA necessarily shared by Mellon Bank.
Patterson.BJ AT Mellon DOT com
412-236-0984
> -----Original Message-----
> From: Forgosh, Seth [SMTP:sforgosh AT TIAA-CREF DOT ORG]
> Sent: Thursday, August 12, 1999 10:13 AM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: ADSM Web Client
>
> from the netware console type the following two commands:
> load dsmc q sess
> if prompted, provide node password
> load dsmc q tsa
> when prompted, provide the netware user id and password that you
> use
> to access the file system (should be supervisor equivilent)
> If you are backing up NDS, you also need to run the following:
> load dsmc q tsa nds
> when prompted, provide the fully qualified nds ID and password
>
> You should then be able to load DSMCAD and have access to your node via
> the
> web browser.
>
> Seth Forgosh
> TIAA-CREF
>
> PS - Don't forget that the url is http://<your server>:1581
>
> -----Original Message-----
> From: Patterson Barry J [mailto:patterson.bj AT MELLON DOT COM]
> Sent: Thursday, August 12, 1999 9:45 AM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: ADSM Web Client
>
>
> Has anyone successfully used the Web Client piece of the ADSM client on a
> Novell Server?
>
> I'm trying without much success. Client version is 3.1.06, client server
> is
> Novell 4.11, SP6. Mainframe is at Version 3, Release 1, Level 2.20. I
> don't have access to the mainframe side, so that's the most I can offer
> there. Mainly my problems seem to be either authentication related or I
> get
> a TCPIP error when I click any of the restore/backup/archive buttons on
> the
> main web screen.
>
> Here's the authentication error from the web client log:
> 08/11/1999 12:25:09 (dsmagent) ANS1835E PASSWORDACCESS is GENERATE, but
> password needed for server 'ADSM_MVSSERV_90-4_001_153-0400'.
> 08/11/1999 12:25:09 (dsmagent) Either the password is not stored locally,
> or
> it was changed at the server.
> 08/11/1999 12:25:09 (dsmagent) Authentication failure
>
> The password hasn't changed, I've got it set the generate option, but it
> doesn't work. If I load the DSMAGENT right after loading DSMCAD, I won't
> get this, but I get the TCPIP connection to the client server has failed.
>
> Any help would be greatly appreciated! I'm asking our local IBM reps for
> help too.
>
> Sincerely,
> Barry
>
> Barry J. Patterson, CNE All views expressed are my own and not
> Mellon Bank, NA necessarily shared by Mellon Bank.
> Patterson.BJ AT Mellon DOT com
> 412-236-0984
|
