Re: ADSM Client performance DLL
1999-07-21 07:53:53
Yes, I posted a workaround in the forum before...
All,
I've just received a workaround from IBM to the "ADSM Client Performance"
stop errors in the event log. The stop events were occurring for me when the
client was rebooted or perf. monitor was started.
Try the following:
From the ..\adsm\baclient\ subdir, issue the commands:
1. unlodctr "ADSM Client Performance"
2. lodctr perfctr.ini
Worked for me. Good luck!
There is an open APAR for this, but as usual I can't remember the number.
Nathan
-----Original Message-----
From: Andreas Giger [SMTP:andy AT SSA.RA.ROCKWELL DOT COM]
Sent: Wednesday, July 21, 1999 4:30 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: ADSM Client performance DLL
Hello,
I'm running an ADSM Client Version 3.1.0.7 on NT4.0 / SP3 with the
API
runtime of ADSM installed. In the NT event log i get the following
messages:
-The Open Procedure for service "ADSM Client Performance" in DLL
"dsmcperf.dll" failed. Performance data for this service will
not
be available. Status code returned is DWORD 0.
- Failed reading the ADSM client "First Counter" registry value.
Status code is returned in the attached data.
Has anybody experienced the same problem or any idea how to fix this
problem?
Thanks
Andy
|
|
|