Problem 1: Will have to contact the vendor on this one (I have found that
they are very responsive. The e-mail id for support is support AT veritas DOT
com
<mailto:support AT veritas DOT com>
Problem 2: I have found that the session terminates when the idle timeout
is exceeded (you can check your options idletimeout, maybe adjust it to be a
bit shorter?) and the media is released when the devclass mount retention
period ends (q devclass whatever f=d). We are currently testing in a lab
and are using a manual tape drive and do not have a lot of activity (so I'm
not sure if you have contention for the tape drive that is causing you a
problem). Do you have manual drives or a library?
Problem 3: I did have a problem with this prior to installing Storage
Migrator maintenance level 2.5.2 - we had to stop/start the recall service
to get the recall to complete. If you contact support, they can get you the
maintenance you need. All is working well now for us.
Problem 4: I think this is one support will have to answer. I haven't seen
this error.
Problem 5: If you create a recall job for all files you will be back to the
original configuration with no migrated files - we did this to assure that
we could remove Storage Migrator if we needed to.
Hope this helps...
-----Original Message-----
From: Leandro Carneiro Torres
[mailto:ctorres AT SERVICE.COM DOT BR]
Sent: Tuesday, June 22, 1999 5:06 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Problems with Storage Migrator
Folks,
I installed Storage Migrator for NT and ADSM Server for NT
and I have a
lot of troubles with this environment.
Problem 1:
- The Storage Migrator have the exclude option but don't
have the
include option, why ????
Problem 2:
- When I access a file, the HSM get this file from the ADSM
Storage
Pool. To do this, one session is open in the ADSM
environment. After the
recall of the HSM file, the ADSM session remains open and
the ADSM media
remains locked. This is wrong !!! And the only way to unlock
the media
is stopping the HSM Service. How can I resolv this problem
???
Problem 3:
- I can recall the migrate file in the same machine that the
file
exists, but I can't recall this file from another machine
that access
this migrate file !!! Why ???
Problem 4:
- Sometimes I have the following error that makes the HSM to
stay in an
unavailable status:
"Mirrored file for 02.mdb contains invalid data"
How can I fix this problem ???
Problem 5:
- How can I clean the HSM Migrate Files and start the
process again from
the beginning ???
Thanks any Help,
Leandro.
--
______________________________________________
Leandro Carneiro Torres - ctorres AT service.com DOT br
Service IT Solutions - http://www.service.com.br
Curitiba: (041) 339-3076 ou (041) 262-8320
Rua Romano Bertagnoli, 655
CEP 80710-060 - Curitiba - PR
Sao Paulo: (011) 3040-1960
Porto Alegre: (051) 212-3666
|