[no subject]

Hi,

I 've a SLR50 filled with about 15GB and got a track following error
when a new schedule
tries to backup..

Is this a timeout or a hardware or media error?
Where can I get information from?

Thanks in advance


=============================================================

Date/Time             Message
--------------------
----------------------------------------------------------
----------------------------------------------------------
06/17/1999 20:01:20   ANR0984I Process 7271 for MIGRATION started in the
06/17/1999 20:01:20   ANR0984I Process 7271 for MIGRATION started in the

                       BACKGROUND at 20:01:20.
06/17/1999 20:01:20   ANR1000I Migration process 7271 started for
storage pool
                       DISKPOOL.
06/17/1999 20:01:25   ANR1001I Migration process 7270 ended for storage
pool
                       BACKUPPOOL.
06/17/1999 20:01:25   ANR0986I Process 7270 for MIGRATION running in the

                       BACKGROUND processed 16 items for a total of
6,774,784
                       bytes with a completion state of SUCCESS at
20:01:25.
06/17/1999 20:01:54   ANR8302E I/O error on drive MT5.0.0.0 (MT5.0.0.0)
                       (OP=WRITE, CC=306, KEY=03, ASC=09, ASCQ=00,
SENSE=F0.00.-

03.00.00.80.00.0E.00.00.00.00.09.00.00.00.00.00.00.02.0B-
                       .00., Description=Drive or media failure).  Refer
to
                       Appendix B in the 'Messages' manual for
recommended
                       action.
06/17/1999 20:01:54   ANR8359E Media fault detected on QIC volume ADSM12
in
                       drive MT5.0.0.0 (MT5.0.0.0) of library QICLIB1.
06/17/1999 20:01:54   ANR1411W Access mode for volume ADSM12 now set to
                       "read-only" due to write error.
06/17/1999 20:01:54   ANR1025W Migration process 7271 terminated for
storage
                       pool DISKPOOL - insufficient space in subordinate
storage
                       pool.